AXIS D2050-VE Network Radar Detector
Specifications
Specifications
To find the latest version of the product's datasheet, go to the product page at axis.com and locate Support & Documentation.
LED Indicators
Status LED
Green
Amber
Network LED
Green
Amber
Unlit
Power LED
Green
Amber
SD card slot
For SD card recommendations, see axis.com
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
For location of the control button, see Product overview on page 4 .
The control button is used for:
•
Resetting the product to factory default settings. See page 14.
•
Connecting to an AXIS Video Hosting System service. See . To connect, press and hold the button for about 3 seconds
until the Status LED flashes green.
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
I/O connector
Use the I/O connector with external devices in combination with, for example, motion detection, event triggering, and alarm
notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:
Indication
Steady green for normal operation.
Steady during startup. Flashes when restoring settings.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to a 10 Mbit/s network. Flashes for network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during firmware upgrade.
16