Axis D2050-VE User Manual

Network radar detector
Hide thumbs Also See for D2050-VE:

Advertisement

AXIS D2050-VE Network Radar Detector
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D2050-VE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Axis D2050-VE

  • Page 1 AXIS D2050-VE Network Radar Detector User Manual...
  • Page 2: Table Of Contents

    AXIS D2050-VE Network Radar Detector Table of Contents Solution overview ......... . .
  • Page 3: Solution Overview

    AXIS D2050-VE Network Radar Detector Solution overview Solution overview AXIS D2050-VE Fixed dome camera PTZ camera and illuminator Door controller Surveillance center...
  • Page 4: Product Overview

    AXIS D2050-VE Network Radar Detector Product overview Product overview Relay connector Grounding screw Network connector Radar module Intrusion alarm switch Control button I/O connector microSD card slot Power LED 10 Status LED 11 Network LED Where to install the product The detector is intended for monitoring open areas.
  • Page 5: Mounting Direction

    Do not repaint the detector. The paint may seriously impact the detector’s performance. Mounting direction The detector covers an angle of ±60° from its central axis. This means that if you mount it on a wall there is a blind spot to each side of the detector.
  • Page 6: Mounting Tilt

    The detector is designed to be mounted 3.5 m above ground. When the detector is mounted higher up the near detection limit is impaired. To improve the near detection limit, tilt the detector downwards with AXIS T91R61 Wall Mount. The table shows the detection range for a human entering in the middle of the detection zone.
  • Page 7: Find The Device On The Network

    Find the device on the network Find the device on the network To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support For more information about how to find and assign IP addresses, see the document How to assign an IP address and access your device on the device page at axis.com...
  • Page 8: Setup

    AXIS D2050-VE Network Radar Detector Setup Setup Need more help? You can access the built-in help from the device’s webpage. The help provides more detailed information on the device’s features and their settings. Configure the detector The detector is ready to use as soon as it is installed. The default live view will show the radar coverage and any detected movement, and you can add detection zones and rules right away.
  • Page 9: How To Configure The Detector

    AXIS D2050-VE Network Radar Detector Setup Image requirements: • Supported file formats are jpeg and png. • Use an image with the same proportions (16:9) or resolution (1920x1080) as the live view. If the image is smaller it will be scaled to fit the window.
  • Page 10: How To Record Video From A Camera When Motion Is Detected

    AXIS D2050-VE Network Radar Detector Setup How to record video from a camera when motion is detected This example explains how to set up the detector and a camera so that the camera starts recording to the SD card five seconds before the detector detects motion and to stop one minute after.
  • Page 11: How To Turn On A Light When Motion Is Detected

    It is possible to use the information about objects’ positions from the detector to make a PTZ camera track objects. To do this, install the application AXIS Radar Autotracking for PTZ on your VMS server (or another computer with access to both the camera and the detector), and follow the instructions in the application.
  • Page 12: How To Minimize False Alarms

    AXIS D2050-VE Network Radar Detector Setup • An exclude zone is an area in which moving objects will be ignored. Use exclude zones if there are areas inside an include zone that trigger a lot of unwanted alarms. Add an include zone 1.
  • Page 13 AXIS D2050-VE Network Radar Detector Setup Go to Settings > RMD zones and select a zone to modify it’s settings. To avoid triggering on specific object types, enable the filter and deselect the object types that should not trigger events...
  • Page 14: Troubleshooting

    AXIS D2050-VE Network Radar Detector Troubleshooting Troubleshooting If you can’t find what you’re looking for here, try the troubleshooting section at axis.com/support Reset to factory default settings Important Reset to factory default should be used with caution. A reset to factory default resets all settings, including the IP address, to the factory default values.
  • Page 15: Technical Issues, Clues And Solutions

    Axis device. Check all cabling and reinstall the device. Possible IP address conflict The static IP address in the Axis device is used before the DHCP server sets a dynamic address. with another device on the...
  • Page 16: Specifications

    AXIS D2050-VE Network Radar Detector Specifications Specifications To find the latest version of the product’s datasheet, go to the product page at axis.com and locate Support & Documentation. LED Indicators Status LED Indication Green Steady green for normal operation. Amber Steady during startup.
  • Page 17 AXIS D2050-VE Network Radar Detector Specifications Digital input - For connecting devices that can toggle between an open and closed circuit, for example PIR sensors, door/window contacts, and glass break detectors. Digital output - For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX®...
  • Page 18: Operating Conditions

    AXIS D2050-VE Network Radar Detector Specifications CAUTION Use single core wires for the relay connector. Function Specifications Type Normally open Rating 24 V DC Max. current Isolation from other circuitry 2.5 kV Electrical endurance 24 V DC, 25 000 operations at +70°C (158 °F)
  • Page 19 User Manual Ver. M5.2 AXIS D2050-VE Network Radar Detector Date: April 2019 © Axis Communications AB, 2017 - 2019 Part No. T10099502...

Table of Contents