Cisco Ucs B260 M4 And B460 M4 Blade Server Installation And Service Note For Servers With E7 V4 Cpus - Cisco UCS B460 M4 Installation And Service Note

Installing a Blade Server in the Chassis
b) Pull the slot divider out of the chassis as shown in callout 2 of the following figure. Keep the slot divider
in case it is needed at another time.
Figure 5: Removing a Slot Divider
Tip

Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v4 CPUs

10
To reinstall the slot divider, align it with the dimples in the slot top and bottom and slide it back
in until it clicks into place.
Installing a Blade Server