Servicing The Blade Server; Drive Replacement - Cisco UCS B460 M4 Installation And Service Note

Servicing the Blade Server

This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•

Drive Replacement

You can remove and install a drive without removing the blade server from the chassis.
The drives supported in this blade server come with the drive sled attached. Spare drive sleds are not available.
Currently supported drives are listed in the specification sheets at this
products/servers-unified-computing/ucs-b-series-blade-servers/datasheet-listing.html
Before upgrading or adding a drive to a running system, check the service profile in Cisco UCS Manager and
make sure the new hardware configuration will be within the parameters allowed by the service profile.
Caution To prevent ESD damage, wear grounding wrist straps when replacing a drive.
Drive Replacement, page 15
Removing a Blade Server Cover, page 17
Internal Components, page 18
Diagnostics Button and LEDs, page 19
Removing a CPU and Heat Sink, page 20
Installing a New CPU and Heat Sink, page 22
Installing Memory, page 25
Installing a Virtual Interface Card Adapter, page 28
Installing an Adapter Card, page 29
Enabling the Trusted Platform Module, page 30
Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v4 CPUs
3
C H A P T E R
URL:http://www.cisco.com/c/en/us/
15