Krups EA89 Series Manual page 4

motels and other residential type environments; bed and breakfast
type environments.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety.
The appliance shall not be placed in a cabinet when in use.
Scalding may occur if the lid is removed during the brewing cycles.
This machine is intended for household use only. Any servicing other than cleaning and user
maintenance should be performed by the nearest authorized Krups Service Center. Visit
our website at www.krupsusa.com in the USA or www.krups.ca in Canada or contact your
respective country's Consumer Service department for the service center nearest to you, or
contact your respective country's Consumer Service department. To reduce the risk of fire
or electric shock, do not attempt to disassemble the machine.
Repair should be done by an authorized Krups Service Center only.
SHORT CORD INSTRUCTIONS
A. A short power cord or a detachable power cord is provided to reduce the risks of
becoming entangled in or tripping over a longer cord accidentally.
B. Longer detachable power cords or extension cords are available and may be used if
care is exercised in their use.
C. If a long detachable power cord or an extension cord is used:
1) the marked electrical rating of the detachable power cord or extension cord
should be at least as great as the electrical rating of the appliance.
2) If the appliance is of the grounded type, the extension cord should be a
grounding type 3-wire cord.
3) the longer cord should be arranged so that it will not drape over the counter
where it can be pulled on by children or tripped over accidentally. The
appliance may have a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully into the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not attempt to
modify the plug in anyway.
2
CAUTION