Replacing Hd - Furuno VR-5000 Operator's Manual

2.5 REPLACING HD

On some vessels several Removable Hard Disk (Type: VR-5014, Code No.:004-379-600,
Option) are carried onboard, replacing one when it is necessary to transport it from the
vessel for playback and extract.
A Removable Hard Disk may only be replaced in the follow situations:
1) When the equipment can be powered off; for example, maintenance while in port, etc.
2) An incident has occurred and the SAVE button on the RAP (VR-5016) was operated to
stop recording.
The HD may not be re-used for recording once the SAVE button has been operated. Contact a
FURUNO dealer for further details.
The HD records navigation data for more than past 12 hours. For longer recording, use Live Player
Backup.
1. Open the DCU with its key. Turn off the VR-5000 by pressing BATTERY, DC, and AC
switch in this order.
2. Pull the lever outward and then unlock the key on the HD. (Position C, downward)
3. Pull the lever to remove the HD.
4. Insert the HD into the cartridge by reversing above procedures.
5. Look the key on the HD. (Position A)
6. Turn on VR-5000.
7. Confirm that HDD is operating (DCU power is ON, SAVE LED is OFF) with no error.
8. Close the DCU and lock it with its key.
9. Refer to the operator's manual of the Live Player for how to playback/extract recorded
data from the HD.
-2.4-