Kurzweil SPS4-8 Musician's Manual page 53

Program Mode
Saving in Program Mode
the Program is saved in the last slot in the User Bank, overwriting what was previously in
that slot. If the current Program is a Program already in the User Bank, then the Program is
saved in its current Program slot. At this point, you can rename the new Program using the
secondary alphanumeric functions of the Group Select and Sound Select buttons.
When the Save button LED is blinking (which means that you pressed Save, and a save
operation is underway), pressing Save again will cause the system to save the current
Program to the indicated Group and Sound in the User Bank. If you want to save it to a
different location in the User Bank, select the location via the Group Select and Sound Select
buttons (or using the Value buttons) before pressing Save again.
Pressing any other button while the Save button is blinking will cancel the save operation.
6-11