Technical Data; Firmware Upgrade - FlashPoint eVOLV 200 R2 Instruction Manual

Firmware Upgrade

This flash supports firmware upgrade through the USB port.
Update information will be released on our official website.
Note: Press < MODE >
will read U-1.0) will be displayed on the panel.

Technical Data

Model
Wireless Slave Unit
Flash Mode
Compatible Cameras
under Radio Transmission
(as slave unit)
Guide No. (ft/m ISO 100)
Flash Duration
Power Output
Power Range
Stroboscopic Flash
Flash Exposure Compensa-
tion (FEC)
Sync mode
A USB cord is not included in this product.
The USB port is a standard Micro USB socket.
button and turn the flash on, the firmware update version (e.g. Version 1.0
eVOLV200
*Radio transmission mode (compatible with Nikon & Canon &
Sony )
Wireless off
Slave unit of radio transmis-
sion
Nikon cameras (R2N as master unit)
Canon EOS cameras (R2C as master unit)
Sony cameras (R2S as master unit)
Speedlite flash head: 170ft/52m (ISO 100) 35mm coverage
Bare bulb flash head: 196ft/60m (ISO 100, with the standard
reflector)
Speedlite flash head: 1/220 to 1/13000 seconds
Bare bulb flash head: 1/220 to 1/11300 seconds
200W
8 steps: 1/128~1/1
up to 90 times, 99Hz
Manual. FEB: ±3 stops in 1/3 stop increments.
High-speed sync (up to 1/8000 seconds), first-curtain sync, and
second-curtain sync
M/Multi
TTL/ M/Multi
20