Brakes; Brake Wear Inspection; Brake Pad Wear Compensation - Triumph Rocket III Manual

Brakes

Brake Wear Inspection

1 Brake pads
2 Minimum thickness line
Brake pads must be inspected in
accordance
maintenance
replaced if worn to, or beyond the
minimum service thickness.
If the lining thickness of any pad
(front or rear brakes) is less than 1.5
mm (0.06 in), that is, if the pad has
worn down to the bottom of the
grooves, replace all the pads on the
wheel.
with scheduled
requirements
Classic Cycles Technical Resources
Maintenance and Adjustment
Brake
replaced as a wheel set. At the
front, where two callipers are fitted
on the same wheel, replace all the
brake pads in both callipers.
Replacing
reduce braking efficiency and may
cause an accident.
After replacement brake pads have
been fitted, ride with extreme
caution until the new pads have
'broken in' .

Brake Pad Wear Compensation

Disc and
automatically compensated for and
has no effect on the brake lever or
pedal action. There are no parts that
and
require adjustment on the front and
rear brakes.
Warning
pads must always
individual
brake pad
be
pads will
wear is
67