Related Manuals for Peri MULTIPROP MP 120
Summary of Contents for Peri MULTIPROP MP 120
- Page 1 MULTIPROP MP 120, 250, 350, 480, 625 Slab Props Instructions for Assembly and Use – Standard Confi guration Edition 05 | 2015...
-
Page 2: Table Of Contents
Accessories Brace Clamp Base MP 50 Foreseeable misapplications Storage and Transportation Tables Permissible prop loads MULTIPROP MP 120, 250, 350, 480, 625 MULTIPROP MP 120, 250, 350, 480, 625 with Base MP 50 Components Components Safety in- Load-bearing Visual check... -
Page 3: Introduction
MULTIPROP Slab Props Introduction Overview, main components MULTIPROP MP Outer Tube Inner Tube Securing Hook Adjusting Collar Pressure Spring Measuring Tape Rubbing Plate End Plate Base MP 50 11 Base MP 50 11a Head Plate 11c Clamping Claw 11b Centering Pin Instructions for Assembly and Use –... -
Page 4: Standard Configuration
– Approval Z-8.312-824. – For load-bearing capacities, see Tables. Intended use 1. PERI products have been designed 5. Changes to PERI components are – scaffold tube couplings according to for exclusive use in the industrial and not permitted and represent a misappli- EN 74. -
Page 5: Safety Instructions
3. Occasionally grease the rubbing plate to ensure easier handling. 6. For better comprehensibility, detailed drawings are partly incomplete. The 4. Only PERI qualified personnel are safety installations which have possibly allowed to carry out repairs on the not been included in these detailed MULTIPROP Slab Props. -
Page 6: Pre-Assembling The Slab Prop
MULTIPROP Slab Props A1 Assembly Pre-assembling the slab prop For the safety of the user, the following should be checked before every use to see whether – the slab prop is complete, – the slab prop has no cracks, holes or broken parts, –... - Page 7 MULTIPROP Slab Props A1 Assembly Rough adjustment of the extension length 1. Press down safety hook (3). –> Inner tube (2) together with the adjusting collar (4) is released. (Fig. A1.02a) 2. Pull out inner tube until the length indicated on the measuring tape (6) is slightly more than the required prop length.
-
Page 8: Assembly With Universal Tripod
MULTIPROP Slab Props A1 Assembly Assembly with Universal Tripod For slab props with tube Ø 48 mm to Ø 120 mm. Slab Props and Tripods – place on clean, flat and sufficiently load-bearing surface only! – are not suitable for planned transfer of horizontal loads! –... -
Page 9: Dismantling
MULTIPROP Slab Props A2 Dismantling Releasing the slab prop under load Outer tube bottom For loads > 60 kN, use the Wing Nut Spanner HD! Dismantling: 1. Release adjusting collar and set load- free with: – hammering the lowering cam. (Fig. -
Page 10: Brace Clamp
MULTIPROP Slab Props A3 Accessories Brace Clamp Item no. 027790 Used as an alternative assembly aid with high slab props as of approx. 4 m using bracing boards 3 x 15 cm. Brace Clamps are not suitable for a planned transfer of horizontal loads! –... -
Page 11: Base Mp 50
MULTIPROP Slab Props A3 Accessories Base MP 50 Take into account separate tables with permissible prop load! – Used for extending the slab prop by 50 cm. – Automatic centering of the slab prop by means of centering pins. – Two clamping claws connect the Base MP 50 with the slab prop. -
Page 12: Foreseeable Misapplications
MULTIPROP Slab Props A4 Foreseeable misapplications Applications of this type or similar are prohibited! Ensure that slab props are always in a perpendicular position! Only use full-faced support surfaces! Fig. A4.01 Fig. A4.02a Fig. A4.02b Slab props must always be in a vertical End plates of the slab props must always lie completely flat. - Page 13 MULTIPROP Slab Props A4 Foreseeable misapplications Applications of this type or similar are prohibited! Do not connect the slab props to Do not use with Tilting Forkhead Do not use for supporting formwork each other! MKK or Tilting Base MKF! elements! Fig.
- Page 14 MULTIPROP Slab Props A4 Foreseeable misapplications Applications of this type or similar are prohibited! Do not use as a trench strut! Do not use as anti-fall protection! Do not use as a guardrail holder! Fig. A4.07 Fig. A4.08 Fig. A4.09 Use designated anti-fall protection, e.g.
-
Page 15: Storage And Transportation
During fork-lift operations, the pallets can be moved either by a fork-lift truck or by using the PERI Lifting Trolley. All pallets can be lifted using the longitudi- nal as well as front sides. -
Page 16: Multiprop Mp 120, 250, 350, 480, 625
31.2 Item no. 022027. 5.80 26.4 29.6 When using PERI slab tables, the permissible load on the MULTIPROP MP 350 5.90 25.1 27.9 Prop is a minimum of 56 kN and a minimum of 36 kN for the MULTIPROP MP 6.00... - Page 17 MULTIPROP Slab Props Table for MULTIPROP 250, 350, 480, 625 with Base MP 50 Permissible prop load [kN] according to the type test MP 250 + MP 50 MP 350 + MP 50 MP 480 + MP 50 MP 625 + MP 50 Overall height L = 1.95 –...
-
Page 18: Components
Slab prop made of aluminium. Used as individual Note prop as well as in combination with MULTIPROP Approved by the German Building Authorities No. Frames MRK to form towers. Z-8.312-824. Technical Data Permissible load: see PERI Design Tables. Ø14 Ø40 Universal Tripod, galv. Note 028000 9.170 Erection aid for slab props with Ø... - Page 19 Head Spindle TR 110-80/55 and the MULTIPROP slab prop. Ø38 027310 8.900 Base MP 50 Note For use with slab props with an end plate thick- Permissible load: see PERI Design Tables. ness of 6 – 10 mm. With clamped quick-release fastener. Ø42 Ø12,5 Ø...
- Page 20 MULTIPROP Slab Props Item no. Weight kg Pallets RP-2, galv. Note 103434 38.500 Pallet RP-2 80 x 120, galv. Follow Instructions for Use! 103429 45.300 Pallet RP-2 80 x 150, galv. Technical Data For stacking and transportation of formwork and Permissible load-bearing capacity 1.5 t.
- Page 22 Tunnel Formwork Bridge Formwork Slab Formwork Climbing Systems Construction Scaffold Facade Scaffold Industrial Scaffold Shoring Systems Access Protection Scaffold System-Independent Accessories Services PERI GmbH Formwork Scaffolding Engineering Rudolf-Diesel-Strasse 19 89264 Weissenhorn Germany Tel. +49 (0)7309.950-0 Fax +49 (0)7309.951-0 info@peri.com www.peri.com...
Need help?
Do you have a question about the MULTIPROP MP 120 and is the answer not in the manual?
Questions and answers