Replacing The Device Dc Fuse; Replacing The Dc Plug Fuse - Dometic CFF SERIES Operating Manual

CFF35, CFF45
➤ Pry out the fuse insert (fig. 4 2, page 11) with a screwdriver.
➤ Replace the defective glass fuse with a new one that has the same type and rating
(4 A, 250 V).
➤ Press the fuse insert back into the housing.
➤ Reconnect the power supply to the device.
7.11

Replacing the device DC Fuse

➤ Disconnect the power supply to the device.
➤ Remove the rubber cover (fig. 4 4, page 11) to access the fuse.
➤ Remove the fuse.
➤ Replace the defective fuse with a new fuse of the same type (Automotive
Standard blade fuse, 10 A).
➤ Re-fit the rubber cover.
➤ Reconnect the power supply to the device.
7.12

Replacing the DC plug fuse

0
➤ Unscrew the contact pin housing (3) from the plug (1).
➤ Replace the defective fuse (2) with a new fuse of the same type and rating (3AG,
Fast Acting, 10 A).
➤ Re-assemble the plug in reverse order.
EN
1 2
Operation
3
21