Pa
3
TECHNICAL SPECIFICATIONS
3.1
Scope of delivery
•
Supernode
•
Removable screw connector kit for Supernode
•
BACnet, Ethernet serial card
3.2
Mechanical specifictions
•
Assembly DIN rail
3.3
Plastic Case
•
Fitted on DIN rail as per DIN 43880 and IEC EN 50022
•
Material: technopolymer
•
Flame retardance: V0 (UL94) and 960 °C (IEC 695)
•
Ball pressure test 125 °C
•
Resistance to creeping current ≥ 250 V
3.4
Electrical specifications
Isolated power supply DC power supply: 48 VDC (36 V minimum to 72 V maximum)
AC power supply: 24 VAC +10% to -15 %, 50/60 Hz
Maximum power input: P= 6 W, S= 8 VA
CPU H8SX/1651 32-bit, 50 MHz
FLASH program memory 2+2 Mbytes
SRAM data memory 512 kBytes, 16-bit
Parameter data memory 13 kBytes + additional 32 kB EEPROM
NAND FLASH memory 32 Mbytes
Duration of working cycle 0.2 s typical (applications of average complexity)
Clock Available as standard and integrated on main board with CR2430 3 VDC lithium battery
Terminal block male/female plug-in connectors, max voltage 250 VAC;
Cable size: min 0.5 mm ² – max 2.5 mm ²
3.5
Electrical connection
Figure 1a
ebm-papst A&NZ Pty Ltd
10 Oxford Road · Laverton North VIC 3026 · Phone +61 (03) 9360 6400 · Fax +61 (03) 9360 6464
ABN 33 115 927 556
NSW Phone +61 (02) 9827 6400 · NSW Fax +61 (02) 9827 6464 · NZ Phone +64 (09) 525 0245 · NZ Fax +64 (09) 525 0246
sales@ebmpapst.com.au · www.ebmpapst.com.au
Figure 1b
Page 3 of 15