Table of Contents
Advertisement
Pa
6.5.4
Adressing the fans on the EC-FAN GATEWAY controller
Figure 12
Figure 13
6.5.5
Manually setting speed
Figure 14
ebm-papst A&NZ Pty Ltd
10 Oxford Road · Laverton North VIC 3026 · Phone +61 (03) 9360 6400 · Fax +61 (03) 9360 6464
ABN 33 115 927 556
NSW Phone +61 (02) 9827 6400 · NSW Fax +61 (02) 9827 6464 · NZ Phone +64 (09) 525 0245 · NZ Fax +64 (09) 525 0246
sales@ebmpapst.com.au · www.ebmpapst.com.au
Press
3 times to return to Main Menu.
Select "C. Manufacturer", enter default password as described in
Selection 6.5.2 and then select "b.I/O Configuration" by scrolling
via
and pressing
.
Here you will assign the appropriate address to the respective Fan.
The address entered will have match the address that has been
initially assigned to the fan via EC-Control. Repeat steps for multiple
fans.
ebm-papst recommends that the first fan be programmed at
address 2 and the following fans thereafter to be programmed at
„n+1".
Choose the following option if you want to manually control the fan
speed:
Select "B". Service, press
.
Select "d.Service Settings", press
Select "b.Manual".
.
Page 8 of 15
Advertisement
Table of Contents
