Usb Driver Installation - Lectrosonics SPNDNT Installation And Startup Manual

USB Driver Installation

The example shown here illustrates the installation
procedure using a Windows operating system. The
screens that appear at each step using another oper-
ating system will vary, but the general steps are very
similar. The driver installation only needs to be done
once on each PC that will be connected to an ASPEN
unit.
Visit http://www.lectrosonics.com, hover your mouse
over Support and click on Aspen Support, then USB
Drivers.
Download the USB Driver Installer.
A zipped file will appear.
NOTE: You must first click on "Extract All" in order
to install the appropriate drivers.
Two versions of the installer are included, one for 32-
bit Windows PCs and another for 64-bit Windows PCs:
• "dpinst-x86.exe" for 32-bit Windows
• "dpinst-amd64.exe" for 64-bit Windows
To start the installer:
Double-click on the appropriate .exe file.
Rio Rancho, NM
Installation and Quick Start Guide
The ASPEN Device Installer opens.
Click Next to proceed.
The End User License Agreement is presented.
Accept, then click Next to proceed.
When installation is complete, the Driver Name and
Status are displayed. Click Finish to close the Device
Installer.
7