Power Consumption - Huawei ME909 Series Hardware Manual

HUAWEI ME909 Series Mini PCIe Module
Hardware Guide

5.6.2 Power Consumption

The power consumptions of ME909 module in different scenarios are respectively
listed in ‎ T able 5-7 , ‎ T able 5-8 , ‎ T able 5-9 and ‎ T able 5-10 .
The power consumption listed in this section is tested when the power supply of the
ME909 module is 3.3 V. Typical values are measured at room temperature, and
minimum and maximum values are measured over the entire operating temperature
range.
Table 5-7 Averaged standby DC power consumption
Description
LTE
(Standby)
HSPA+/WCDMA
(Standby)
GSM/
GPRS/EDGE
(Standby)
LTE
(Idle)
Issue 0.1 (2013-06-09)
Bands Test Value
LTE TBD
bands
UMTS TBD
bands
GSM TBD
bands
LTE TBD
bands
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Electrical and Reliability Features
Units Notes/Configuration
mA DRX cycle=8 (2.56 s)
Module is registered on
and not connected to the
4G network.
USB is in suspend mode.
mA DRX cycle=8 (2.56 s)
Module is registered on
and not connected to the
3G network.
USB is in suspend mode.
mA MFRMS=5 (1.175 s)
Module is registered on
and not connected to the
2G network.
USB is in suspend mode.
mA Module is powered up and
idle
DRX cycle=8 (2.56 s)
Module is registered on
the 4G network, and PDP
is activated,
No data transmission.
USB is not in suspend
mode.
37