Kohler 32EOZ Service Manual page 9

Moving Parts
WARNING
Hazardous voltage. Moving rotor.
Can cause severe injury or death.
Operate the generator set only when
all guards and electrical enclosures
are in place.
WARNING
Rotating parts.
Can cause severe injury or death.
Operate the generator set only when
all guards, screens, and covers are in
place.
WARNING
Airborne particles.
Can cause severe
blindness.
Wear protective goggles and clothing
when using power tools, hand tools,
or compressed air.
Tightening the hardware.
projectiles can cause severe injury
or death. Loose hardware can cause
the hardware or pulley to release from
the generator set engine and can cause
personal injury. Retorque
crankshaft and rotor hardware after
servicing. Do not loosen the crankshaft
hardware or rotor thrubolt when making
adjustments or servicing the generator
set. Rotate the crankshaft manually in
a clockwise direction only. Turning the
crankshaft bolt or rotor
counterclockwise can loosen
hardware.
TP-5936 7/04
Servicing the generator set when it
is operating. Exposed moving parts
can cause severe injury or death.
Keep hands, feet, hair, clothing, and
test leads away from the belts and
pulleys when the generator set is
running. Replace guards, screens, and
covers before operating the generator
set.
Sound shield removal.
moving parts can cause severe
injury or death. The generator set
must be operating in order to perform
some
procedures. Be especially careful if the
sound shield has been removed,
leaving the belts and pulleys exposed.
(Sound-shield-equipped models only)
Notice
This generator set has been
rewired from its nameplate voltage
to
Voltage reconnection. Affix a notice
to the generator set after reconnecting
injury or
the set to a voltage different from the
voltage on the nameplate.
voltage reconnection decal 246242
from
distributor/dealer.
Flying
Hardware damage. The engine and
generator set may use both American
Standard and metric hardware. Use
the correct size tools to prevent
rounding of the bolt heads and nuts.
all
thrubolt
the
Exposed
scheduled maintenance
NOTICE
246242
NOTICE
Order
an authorized service
NOTICE
NOTICE
When replacing hardware, do not
substitute with inferior
hardware. Screws and nuts are
available in different hardness ratings.
To indicate hardness,
Standard hardware uses a series of
markings, and metric hardware uses a
numeric system. Check the markings
on the bolt heads and nuts for
identification.
NOTICE
Fuse replacement. Replace fuses
with fuses of the same ampere rating
and type (for example: 3AB or 314,
ceramic). Do not substitute clear
glass-type fuses for ceramic fuses.
Refer to the wiring diagram when the
ampere rating is unknown
questionable.
NOTICE
Saltwater damage. Saltwater quickly
deteriorates metals. Wipe up saltwater
on and around the generator set and
remove salt deposits from metal
surfaces.
Safety Precautions and Instructions
grade
American
or
V