Fm (Rds) Operation - Hertz HMR 10 D Owner's Manual

9.2

FM (RDS) operation

Select FM as Playing Source.
Press SRC to select the FM mode.
FM Settings menu
- Long press ENT to enter the FM settings menu.
- Short pressing the SEEK – or SEEK + you can select the desired function.
- List of available functions:
• Scan settings
• Audio settings
• System
- Short press ENT to enter the selected function setup.
- Short pressing SEEK – or SEEK + you can select a different function setup.
- Then confirm the new setup by short pressing ENT.
- Long press ENT to exit the FM settings menu.
FM preset station selection
- Short press SEEK – to move to the previous preset.
- Short press SEEK + to move to the next preset.
SEEK tuning
- Long press SEEK – to seek the previous strongest station.
- Long press SEEK + to seek the next strongest station.
Manual tuning
- Short press AS to enter Manual tuning.
- The display shows MANUAL (the system returns in AUTO mode after a few seconds if no button is pressed).
Auto store
- Only stations with sufficient signal strength will be detected and stored in the memory.
- Press and hold AS to automatically find the first 18 strongest stations and store them into presets.
- The new stations replace any stations already stored.
Save a preset
- Tune the desired station/frequency and then press and hold
- Use the SEEK +/- buttons to select the desired preset number then press and hold
FM (RDS) station info
- Short press the
- List of available info:
• Preset number / Tuning frequency (default).
• Radio text.
• Program Type (PTY).
• Tuning frequency.
10
button to change the displayed info.
, the preset number starts to blink.
to save it.