Spa Controls - Using Your Swim Jets - Master Spas INT H2X CHALLENGER 19D Owner's Manual

SWIM SPA CONTROLS - USING YOUR SWIM JETS
EXERCISING OR SWIMMING IN YOUR SWIM SPA
The large jets grouped at the end of your swim spa push water out to create a current to exercise
against. The water flow for these exercise jet is controlled by the jet pump(s) as well as water
diverter controls*. You can vary the power of the water flow by turning on or off Jets 1 and/or Jets
2* from the Spa Control Panel in conjunction with adjusting the large water diverter(s)* along the
top perimeter of the spa. By using the pump(s) and water diverter controls*, you can divert more or
less water to flow through these jets to further vary the current. It is best to turn the jet pumps off
before adjusting the water diverter controls*. For diverter location and pump control options, see
Pump Control Diagrams in the Swim Spa Controls section.
*If equipped.
DO NOT DIVE. DO NOT DIVE. 100 93