Labquest App; Quick Data Collection - Vernier LabQuest 2 Quick Start Manual

LABQUEST APP – NAVIGATION
A B
F G
8
C D E
Tap the tabs to access different
screens of the LabQuest App:
A – Meter
B – Graph
C – Table
D – Lab Instructions
E – Notes
Tap the buttons to collect data:
F – Start/Stop
G – Keep (shown during
event-based data
collection only)
Three steps to collect data:
1 Turn on LabQuest.
LabQuest App launches
automatically.
2
Connect a sensor.
The sensor will auto-ID. The
default collection rate for the
sensor is set up.
3 Tap Collect .
You are now collecting data.
LABQUEST APP – QUICK DATA COLLECTION
LabQuest App switches to the Graph screen
when data collection begins. Tap to end
collection early.
9