Safety Information; Warranty - Vernier LabQuest 2 Quick Start Manual

SAFETY INFORMATION

Read all safety information and operating instructions included in this Quick-Start Guide
prior to using LabQuest 2.
LabQuest is designed to be splash resistant, however, avoid water immersion and
standing liquid on the display. If water gets in the device, immediately shut down the
device (tap System on the Home screen, then tap Shut Down, or hold down the power
button until the shutdown sequence begins). Remove battery, connected cables, SD card,
and any other accessories. Allow to dry thoroughly before restarting. Do not attempt to
dry using an external heat source.
Safe operating temperatures are from 0°C to 45°C. Storage temperatures are -30°C to
60°C. Exposures to low or high extreme temperatures will temporarily reduce battery
life. Avoid rapid temperature changes as condensation may form inside the device. Do
not leave in a car, as temperatures can exceed the maximum storage range.
LabQuest contains a Lithium-Ion battery. Use only the supplied battery for this device.
Do not puncture or expose to excessive heat or flame.
Do not store LabQuest in a chemical closet or in areas of concentrated chemical gases.
4
What is included with your
LabQuest 2:
• LabQuest 2 interface
• Rechargeable battery
• Power adapter
• USB cable
• Quick-Start Guide
• Stylus (in unit)
• Stylus tether
• Logger Lite CD

WARRANTY

Warranty Information
LabQuest 2 – Vernier warrants this product
to be free from defects in materials and
workmanship for a period of five years from the
date of shipment.
LabQuest 2 Battery – Vernier warrants this
product to be free from defects in materials and
workmanship for a period of one year from the
date of shipment.
This warranty does not cover damage to the
product caused by abuse or improper use.
5