EPS Bio Technology EasyPlus mini MasterDriver Quick Reference Manual page 5

5. Squeeze the bottle until a tiny drop forms at the tip of the
bottle.
6. Touch the drop to the Blood collection area at the tip of the
test strip. When you hear beeps, you have enough control
solution in the test strip.
7. The meter starts to count down from 5 seconds, the display
shows "Ok", and then shows the test result.
8. Do not remove the test strip yet. Check if the reading falls
within the range printed on the test strip bottle.
9. Remove the test strip and throw it away after you have
compared the reading to the range printed on the test strip
bottle.
5