Make Certain That The Kit Will Fit; Tools Needed - QRS Music Technologies QRS PNO3 Installation Manual

Make Certain that the Kit will Fit!
All kits play 80 notes, excluding the first and last 4 keys of the standard piano keyboard. The following ques ons
should be asked before beginning an installa on:
1. Is it a grand or upright piano? The kit will not fit into a spinet piano.
2. Is the keybed made of wood or a wood‐veneered laminate?
3. Does the piano have a range of 88 notes, extending from low A to high C?
4. Is the keyframe made of wood?
5. Is the piano well‐regulated and in good mechanical condi on?.
6. Does the piano have sufficient space beneath the soundboard or inside an upright to mount the pedal solenoid &
power supply (5.25" x 5.25" x 12.5")?
7. Can the back of the key frame be cut away 1 3/16"?
Tools Needed
Paper
Pencil
Measuring Tape
Long Straightedge
Adjustable Frame Square
Screwdriver (Assortment)
Power Screwdriver (Op onal)
Socket (Assortment)
11/32" Nut Driver
5/16" Nut Driver
Hammer
Hacksaw
Metal File
Rasp
U lity Knife
Plas c Cu ng Board
6
Introduc on
Wood Chisel
Awl
Wood Glue
Spray Paint (Black)
Sandpaper (Assortment)
Palm Sander (Op onal)
Jig Saw
Jig Saw Blades (Assortment)
Power Drill (Right Angle Op onal)
Drill Bits (Assortment)
1‐3/4" Forstner Bit or Flat (paddle) Bit
Center Punch
Circular Saw ‐ 7 1/2" blade (Op onal)
Router (Op onal)
Vacuum Cleaner