FlexDSL ORION 3 Technical Description And Operations Manual
  1. Manuals
  2. Brands
  3. FlexDSL Manuals
  4. Modem
  5. ORION 3
  6. Technical description and operations manual

FlexDSL ORION 3 Technical Description And Operations Manual

Ltu devices
Hide thumbs Also See for ORION 3:
Table of Contents

Advertisement

Quick Links

FlexDSL ORION 3
LTU DEVICES
TECHNICAL DESCRIPTION AND OPERATIONS MANUAL
Version
Document name
Revision
User Manual
1.16
UM_Flexdsl-LTU-Orion3_V1-16.Docx
30. August 2018
1
LTU Orion 3

Advertisement

Table of Contents
loading

Related Manuals for FlexDSL ORION 3

Summary of Contents for FlexDSL ORION 3

  • Page 1 User Manual LTU Orion 3 FlexDSL ORION 3 LTU DEVICES TECHNICAL DESCRIPTION AND OPERATIONS MANUAL Version 1.16 Document name UM_Flexdsl-LTU-Orion3_V1-16.Docx Revision 30. August 2018...

  • Page 2: User Manual Ltu Orion

    User Manual LTU Orion 3 © Copyright 2018 by FlexDSL Telecommunications AG. The content of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of FlexDSL Telecommunications AG.

  • Page 3: Table Of Contents

    Alarm Indication ......................46 3.3.1 LEDs ........................46 3.3.2 Alarm LEDs ......................47 Management of Orion 3 Devices ................49 3.4.1 Management by Local Craft Terminal or MONITOR Interface (RS-232 Interface) 49 3.4.2 Management by Ethernet Interface ..............50 3.4.2.1 Telnet ......................
  • Page 4 User Manual LTU Orion 3 PROGRAMMING GUIDE ....................57 Command Structure ....................57 Orion3 Software ......................59 Configuration and Application Storage ............... 59 Groups of Commands Requiring Confirmation ............61 Command Syntax ....................... 61 Commands ......................... 62 4.6.1 Main Menu ......................62 4.6.1.1...
  • Page 5 User Manual LTU Orion 3 4.6.4.31 <SOFTCONFIRM> Command ..............84 4.6.4.32 <SOFTINFO> Command ................85 4.6.4.33 <PING x.x.x.x> Command ................85 4.6.4.34 <MODEMVIEW> Command ................. 85 4.6.4.35 <SD SNAPSHOT> Command ..............85 4.6.4.36 <SD DIR> Command ................... 85 4.6.4.37 <SD DEL [NAME]> Command ..............85 4.6.4.38...
  • Page 6 User Manual LTU Orion 3 4.6.5.49 <IOIP {OPTION} [IF]> Command ............... 105 4.6.5.50 <NET> Command ..................107 4.6.5.51 <H> Command ................... 107 4.6.5.52 <NETCONFIG [N/R/S/B]> Command ............108 4.6.5.53 <COSCONFIG [N/R/S/B]> Command ............110 4.6.5.54 <RSTP DEFAULT> Command ..............111 4.6.5.55...
  • Page 7 User Manual LTU Orion 3 4.6.5.111 <SSH PORT [N]> ..................131 4.6.5.112 <SSL [SHOW/DEL] [options]> ..............131 4.6.5.113 <RADIUS [1/2] SECRET> ................132 4.6.5.114 <RADIUS [1/2] TEST> ................132 4.6.5.115 <RADIUS [1/2] [IP:P/OFF]> ................ 132 4.6.5.116 <RADIUS RETRIES [0..10]> ..............133 4.6.5.117 <RADIUS TIMEOUT [1..5]>................

  • Page 8: Version Control

    IT’S ONLY ALLOWED TO USE EXTERNAL POWER SUPPLYS THAT ARE APPROVED ACCORDING TO THE SAFETY STANDARD IEC/EN 60950-1. IT’S ONLY ALLOWED TO USE THE UNITS WITH HOUSINGS SUPPLYED FROM FLEXDSL TELECOMMUNICATIONS AG (SUBRACKS, MINIRACK, UTTX). THE RACK MUST BE CONNECTED PERMANENTLY TO RELIABLE PROTECTIVE EARTH CONDUCTOR.

  • Page 9: Eu Directive 2002/96/Ec And En50419

    User Manual LTU Orion 3 Please read this manual carefully before operating the system. Installation of this equipment has to be done by qualified personnel only. EU DIRECTIVE 2002/96/EC AND EN50419 Our equipment is marked with the recycling symbol. It means that at the end of the life of the equipment you must dispose it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream.

  • Page 10: Selection Guide

    User Manual LTU Orion 3 1 SELECTION GUIDE Functionality FlexDSL Orion3 Models FG-PAM-            SRL-2E1B/4Eth-RP, V90 FG-PAM-             SRL-2E1B/N64/4Eth-RP,V91 FG-PAM- ...

  • Page 11: Precaution

    LTU Orion 3 2 PRECAUTION The present document describes devices of the FlexDSL Orion 3 LTU family. The document contains the technical description of the devices, installation, configuration, and operation instructions. Appendices and installation manuals containing additional information about the system are also an integral part of the present document.

  • Page 12: Technical Description

    In addition, the FlexDSL Orion3 modem range also supports DSL channel bonding for up to 4 copper pairs in order to achieve speeds to 60.8Mbps! FlexDSL Orion3 SHDSL.bis Extended modems can provide up to 4 complete E1 interfaces, which support framed and unframed services (G.703/G.704).

  • Page 13: Description Of Orion3 Ltu Devices

    User Manual LTU Orion 3 Supported management features: • Local Craft Terminal (RS-232), Telnet, SNMP and WEB • Two levels of system users: administrator and user, protected with passwords Supported operating modes: • Multi-Service Operation, Point-to-Point, Point-to-Multipoint and Ring Applications Description of Orion3 LTU Devices Orion3 subrack devices represent a printed circuit board with a front panel.

  • Page 14: Remote Power Supply And Wetting Current

    User Manual LTU Orion 3 3.2.1 Remote Power Supply and Wetting Current The wetting current and remote power supply modes can be changed by jumpers and the configuration management. Despite the safe voltage on each DSL copper wire with respect to the ground (<120 Volts according to EN 60950), the use of the remote power supply has to be done...
  • Page 15 User Manual LTU Orion 3 Remote Power and Wetting Voltage Current Restrictions Current Supply Modes Remote Power Source 120VDC 60, 90 125mA not 60mA available for 90mA 120VDC 125mA XM60 DSL-1 XM52 DSL-1 XM42 DSL-1/2 XM47 DSL-1/2 XM55 DSL-1 Configuration SW:...
  • Page 16 User Manual LTU Orion 3 XM47 XM48 XM58 XM50 XM38 XM54 XM42 XM55 XM52 XM60 XM57 XM53 XM35 XM56 XM51 XM65 Figure 3.1 Remote power jumper location In the following two figures two main applications are showed for clarifying the description about remote power modes.

  • Page 17: Description Of Orion3 Interfaces

    User Manual LTU Orion 3 Figure 3.3 Example 200 Volts, 90mA 3.2.2 Description of Orion3 Interfaces 3.2.2.1 SHDSL Interface The Orion3 devices are available with 1, 2 or 4 SHDSL interfaces. The interfaces can operate fully independent of each other as well as they can be combined to operate in multipair mode.

  • Page 18: Multipair Mode

    User Manual LTU Orion 3 3.2.2.1.2 Multipair Mode If 2, 3 or 4 SHDSL channels are configured to operate in the multipair mode, they work at the same clock frequency and line rate like one SHDSL channel with doubled, tripled or quadrupled transmission capacity.

  • Page 19: Reservation Mode

    Figure 3.4 Example of four-pair multipair data transmission 3.2.2.1.3 Reservation Mode Reservation is provisioned for 2- and 4-channel FlexDSL Orion3 devices. The main task of reservation is to transmit the most important data even in the case of the failure of one or several SHDSL connections.
  • Page 20 User Manual LTU Orion 3 DSL-2: Baserate 61 8 TS WAN 8 TS WAN 28 TS E1-2 1 TS WAN Total E1-1, E1-2 E1-1, E1-2 E1-1, 28 TS E-12 69 TS WAN 8 TS WAN 1 TS WAN DSL-1: Baserate 72...
  • Page 21 User Manual LTU Orion 3 Figure 3.5 Example of reservation While for a two SHDSL channels system in case of a failure the substitution of channels is “trivial”, in three and four SHDSL channels system different variants are possible. However, any system using the reservation mode follows a strict logic in channel substitution.

  • Page 22: Automatic Configuration Of A Link

    Table 3.7 Examples of reservation of systems with two, three and four SHDSL channels 3.2.2.1.4 Automatic Configuration of a Link FlexDSL Orion 3 devices support to configure the complete link in accordance with the Master- Modem configuration. This mode is available for the following links: •...
  • Page 23 User Manual LTU Orion 3 • Also a next Regenerator receives the structure from the previous Regenerator and performs configuration according to it. • The Slave-Modem receives the stream structure from the last Regenerator in the link and also performs configuration •...

  • Page 24: E1 Interface (G.703/704)

    User Manual LTU Orion 3 Figure. 3.8 Automatic configuration 2x E1 and Ethernet are transmitted over two SHDSL link. 3.2.2.2 E1 Interface (G.703/704) 3.2.2.2.1 Framed and Unframed E1 The Orion3 product family supports transmission of framed and unframed E1 interfaces.
  • Page 25 User Manual LTU Orion 3 3.2.2.2.4 AIS Detection If this mode is enabled, the reception of an AIS through the E1 interface will cause the following: • a non-urgent alarm will appear • AIS will be transmitted to the remote device of the DSL...

  • Page 26: Nx64, Rs-232/Rs-485 And G.703/E0 Interfaces

    User Manual LTU Orion 3 synchronization priorities, this external clock should have the highest priority. If the external clock generator is absent, it should not be included in the priority list. E1-1, E1-2, E1-3 and E1-4 mean synchronization from one of the input E1 stream. If the E1 stream, which serves as a clock, is lost, the device switches to another clock according to the priority level.

  • Page 27: Nx64 Clocking Modes

    User Manual LTU Orion 3 External Clock SETCLOCK G.703-1 G.703/E0 Stream Stuffing SHDSL Priority Selection G703 G.703-2 Synchronisation Internal Clock G.703/E0 Stream Clock Recovery SHDSL G703CLOCK Figure 3.10. G.703/E0 clock modes 3.2.2.3.1 Nx64 Clocking Modes Nx64 clocking modes can be selected by using the command EXTCLOCK [SRC] [DIR]. The SRC...

  • Page 28: Automatic V.54 Loops

    Lines 140 and 142 are not supported by the system. 3.2.2.4 Input Sensor and Output Relay FlexDSL Orion3 devices can be equipped with IO module containing 4 Inputs and 4 Outputs. Input is a pair of contacts connected to current detector; if the current is present in the electric circuit the Input switches its state to "Closed".

  • Page 29: Ethernet Interface

    3.2.2.5 Ethernet Interface The Ethernet interfaces of all FlexDSL Orion3 devices fulfil the standard IEEE 802.3 and support the Port (PBVLAN command) and Tag (VLAN command) based VLAN protocol (Virtual Local Area Network – IEEE 802.1Q). A virtual network represents a group of network nodes, whose traffic, including the broadcast traffic, is completely isolated from other network nodes.
  • Page 30 User Manual LTU Orion 3 Figure 3.12 Internal Switch For single-channel modems the DSL channel is strictly mapped to WAN1, while the E1 interface is strictly mapped on WAN2. Figure 3.13 Internal Switch for single-channel devices (FG-PAM-SRL-2E1B/4Eth-RP,V90) A group of LANx Ports (Ethernet interface) means the LAN port connector on the front panel or backplane that can serve as a Trunk port, Access port or Mixed port.
  • Page 31 User Manual LTU Orion 3 The Mixed port is a port where tagged and untagged traffic is allowed. However, on ingress, a default VLAN tag is assigned to untagged traffic (configured by QOS and VLAN commands), so that all frames in the system are actually tagged. On egress frames with VLAN equal to the default VLAN (configured with VLAN command), exit the port untagged, while to all other VLANs apply pass/block rules set by the ALLOW command.

  • Page 32: Mac Filter

    User Manual LTU Orion 3 VLAN other, VID=100 PBVLAN A Same MAC on same PBVLAN for VLAN≠1..8 VLAN other, VID=200 PBVLAN A VLAN1,VID=1 PBVLAN B VLAN other, VID=100 PBVLAN B Same MAC on same PBVLAN for VLAN≠1..8 VLAN other, VID=200 PBVLAN B Table 3.9 Same MAC address on different VLANs and PBVLANs...

  • Page 33: Mac Filter Rules

    User Manual LTU Orion 3 Number of Entries Every White List stores up to 10 MAC addresses. A same MAC address can be stored in several White Lists. 3.2.2.6.1 MAC Filter Rules MAC Address Filtering If ingress packet has a MAC address that is not listed in the White List the LAN interface belongs to, this packet will be dropped.

  • Page 34: Ieee 802.1X Device Settings

    User Manual LTU Orion 3 3.2.2.7.1 IEEE 802.1x Device Settings The following IEEE 802.1x parameters can be changed on Orion3/MiniFlex device: IEEE 802.1x Enable / Disable Enables or Disables IEEE 802.1x protocol on a LAN port IEEE 802.1x SHOST/MHOST/MAUTH If IEEE 802.1x is enabled on a LAN port the port may work in these three modes: •...

  • Page 35: Radius

    User Manual LTU Orion 3 Figure 3.14 Port role definition in RSTP. When a failure appears on a network, an alternative path will be selected and port roles will be changed. Please take a look to a picture below: Figure 3.15 Change of Port role upon network failure.

  • Page 36: Radius Server Setup With Defined Vendor Specific Attributes

    Vendor configuration. File dictionary.flexdsl First of all we need to tell freeradius server to use Vendor Specific Attribute for the access to FlexDSL equipment. We need to create the following text file: File is located at /usr/share/freeradius/dictionary.flexdsl...
  • Page 37 String to add: $INCLUDE dictionary.flexdsl If Vendor Specific Attributes are used, the server will send the message containing two fields: <Vendor-Specific> <4249 0 ACCESS_RIGHTS_STRING>. Here 4249 is Vendor ID of FlexDSL Telecommunications AG. ACCESS_RIGHTS_STRING contains the user privileges. Client configuration. File clients.conf.

  • Page 38: Simplified Radius Server Setup

    User Manual LTU Orion 3 NOTE: Don`t forget to restart freeradius server after changing configuration using sudo service freeradius restart command. 3.2.2.9.2 Simplified RADIUS Server Setup Alternatively we can setup the freeradius server without Vendor Specific dictionary file and declare Vendor-Specific field in user configuration file instead User configuration.

  • Page 39: Radius Server Setup With Defined Service-Type Attribute

    • Type 6: Administrative; modem grants access equal to FlexDSL-Rights = ALL • Type 7: NAS Prompt; modem grants access equal to FlexDSL-Rights += TEST, += STATUS User configuration. File users User records are in /etc/freeradius/users # Orion3 User with Administration rights ORION3ADMIN Cleartext-Password := "AdminPass"...
  • Page 40 User Manual LTU Orion 3 BACKUP LATHR RESTORE LICENSE ADD LOAD DEFAULT TLM D EVERYTHING TLM S SECURE TLM C SENSOR USERS [O/C] USER TFTP APPLY CONFIRM G826 STATUS :LINK Link status G826 C LINKNM G826 E1 STATUS G826 E1 C...

  • Page 41: Lldp

    DSL/E1 links. LLDP protocol is vendor neutral, so various devices can interoperate and introduce their capabilities to remote peers even if they were produced by other vendors. The LLDP implementation in FlexDSL Orion3 / MiniFlex devices can read and display the following parameters received from remote peer:...

  • Page 42: An Integrated Switch Of 64-Kbit/S Time Slots

    User Manual LTU Orion 3 Local system advertises the same own parameters to its neighbours. 3.2.3 An Integrated Switch of 64-kbit/s Time Slots 3.2.3.1 E1 Transmission Mode (only E1 Time Slots) In this mode, only time slots of E1 data streams are transmitted over SHDSL lines according to ITU-T Rec.

  • Page 43: Test Loops

    User Manual LTU Orion 3 Figure 3.16 Example of distribution of time slots in an SHDSL frame at a line rate of 89x64 kbit/s in the mode when both E1 interfaces 1280 kbps of V.35 and both internal WAN1 and WAN2 ports are used for the termination device.

  • Page 44: Analogue Loop Back

    User Manual LTU Orion 3 WARNING WHEN ACTIVATING LOOP2 UNDER CONDITIONS THAT SHDSL IS USED TO TRANSMIT ETHERNET DATA, IT IS NECESSARY THAT THE DEVICE IS DISCONNECTED FROM THE ETHERNET NETWORK! 3.2.4.1 Analogue Loop back During the analogue loop back test, the SHDSL transceiver receives the transmitted signal from its own transmitter.

  • Page 45: Bert Test

    User Manual LTU Orion 3 SLAVE MASTER CRC4 CRC4 CRC6 CRC6 Receiver Generator Receiver Generator Generator Receiver SHDSL G.826 G.826 Receiver Generator Counters Counters Generator Receiver Receiver Generator Figure 3.18 G.826 performance evaluation On the E1 side, four CRC4 check bits are generated per sub-multiframe (SMF) and compared with the corresponding bits of the next SMF.

  • Page 46: Alarm Indication

    User Manual LTU Orion 3 Alarm Indication When managing the device via the local craft terminal (RS-232) or via Telnet, all LEDs, except the Ethernet LEDs will blink with a frequency of 1 Hz. 3.3.1 LEDs The LEDs display the normal operation conditions and alarm conditions of a device.

  • Page 47: Alarm Leds

    User Manual LTU Orion 3 LED Status Device Status Ethernet left LED Green Connection is active Connection is not active Green blinking Data receive and/or transmit Ethernet right LED Amber 100 Mbit/s receive/transmit rate 10 Mbit/s receive/transmit rate Table 3.12 Ethernet LED behaviour according the device status...
  • Page 48 HW-F Hardware failure DSL-F DSL signal processor initialization failure Table 3.14 Alarm LEDs of an Orion 3 device “A” – amber LED “R” – red LED “RB” – red LED blinking To display an urgent alarm has the highest priority (overwrite a non-urgent alarm).

  • Page 49: Management Of Orion 3 Devices

    User Manual LTU Orion 3 Management of Orion 3 Devices Orion3 devices have integrated management and diagnostic functionality. The access to this functionality is done by: • Connecting the local craft terminal (LCT) or MONITOR interface (RS-232 interface) to any management terminal (PC with VT100 terminal, for example the application Hyper- Terminal).

  • Page 50: Management By Ethernet Interface

    User Manual LTU Orion 3 3.4.2 Management by Ethernet Interface 3.4.2.1 Telnet The TELNET (TELecommunication NETwork) access is made through the Ethernet network. With any computer and a program with the Telnet protocol Orion3 devices (they always have an Ethernet interface) can be fully managed. After opening the Telnet session, there is a user authentication: “admin”...
  • Page 51 User Manual LTU Orion 3 To manage devices via TELNET, it is necessary: • open the Telnet session for the ORION3 LTU device. Perform authentication (enter the unit with the admin rights) • to access the IAD unit, enter <%105>...
  • Page 52 User Manual LTU Orion 3 Figure 3.22 WEB interface – “Orion3 Configuration” Figure 3.23 WEB interface – “Orion3 Configuration-Device Management” All tables are displayed dynamically. The parameters in the tables are refreshed every 5 seconds. Click the button in the left part of the window of the WEB browser to display the necessary table.
  • Page 53 User Manual LTU Orion 3 Figure 3.24 WEB interface – “Orion 3 DSL Status, Statistics G.826, WAN (Net) Statistics, E1 Statistics, TCP/IP, ICMP Statistics”...

  • Page 54: Snmp

    MIB II RFC1213-MIB, a standard MIB for all devices is fully supported • IF-MIB, RFC-2863, MIB descriptions of interfaces is fully supported • NATEKS-MIB, MIB for the Nateks/FlexDSL equipment is fully supported • DS1-MIB, RFC-2495, MIB describing E1 streams is partially supported •...
  • Page 55 User Manual LTU Orion 3 Local and Remote Management Console are intended for the graphical representation of network map, device icons and device views. It accepts the user actions such as mouse clicks, zooming, key pressings, etc. The Management Console interacts with the SNMP Server via the Remote Procedure Call (RPC) data in TCP/IP envelope.
  • Page 56 User Manual LTU Orion 3 Figure 3.26 Message exchange in SNMP-based networks. NOTE: The NMS Server is not involved into the message exchange for management protocols such as Telnet, SSH and HTTP. These sessions are initiated between Management Console and Network Element directly.

  • Page 57: Programming Guide

    User Manual LTU Orion 3 4 PROGRAMMING GUIDE Command Structure Main Menu Performance Fault and maintenance Configuration management management management G826 ENCODE G826 C LINKNM ENCODE KEY [N] G826 E1 LINKALARM ENCODE [ON/OFF] [N] G826 E1 C ALARMLOG [N] SECURE [ON/OFF]...
  • Page 58 User Manual LTU Orion 3 SET [E11-E12] [IN/EXT] RSTP [A..E] [ON/OFF] PATD [2En/bitsring] PBVLAN [IF] [A..E] TS [TX/RX] [list/NONE] MODE [IF] [ACC/TRUNK/MIX] CONF VLAN [IF] [1..8] APPLY [ALL/GROUP] QOS [IF] [0..7] CONNECT [N:[1-13/R]] ALLOW [IF] [VLAN list] LINK [NN] VID [1-8] ID...

  • Page 59: Orion3 Software

    User Manual LTU Orion 3 Orion3 Software Every Orion3 device stores up to two software versions in the memory (EEPROM): one unchangeable software (standby software No.1) and one upgradeable software (software No.2). Two versions are necessary to prevent any device failure due to downloading of faulty or damaged software or due to hardware failure during downloading of the new software.
  • Page 60 User Manual LTU Orion 3 Restoring from backup copy Startup configuration Backup configuration Saving of backup copy Loading (command BACKUP) Running configuration Changing values New configuration Configuration changing Figure 4.1 Operations of the configuration parameters after the restart Configuration changes, which are used instantly, are written into the running, startup and new configuration, and the device continues working according to these configurations.

  • Page 61: Groups Of Commands Requiring Confirmation

    User Manual LTU Orion 3 Restoring from backup copy (command RESTORE) Startup configuration Backup configuration Confirming of changes Loading (command CONFIRM) Saving of backup copy (command BACKUP) Loading Running configuration Appling of changes (command APPLY) Changing values New configuration Configuration changing Figure 4.3 Operations of configuration parameters that should be confirmed...

  • Page 62: Commands

    User Manual LTU Orion 3 Commands 4.6.1 Main Menu The main menu is presented as shown below: MODEL FG-PAM-SR4L-4E1B/4Eth-RP, V96 HW 1.6 SW 1.4.37 EXT rates DATE 29-11-2012 RUNS 0d 00:27:09 ALARM URGENT STATUS LINK DOWN MODEL_DESC Subrack Quad xDSL/Quad E1/Quad Ethernet 120 Ohm IP 192.168.0.235...

  • Page 63: General Commands

    User Manual LTU Orion 3 4.6.2 General Commands 4.6.2.1 <H> Command After the <H> command is entered the device displays the help menu. 4.6.2.2 <APPLY [ALL/GROUP]> Command This command is used to apply changes in all groups or to apply changes in one of these groups: LINE, VLAN, NET, and SNMP.

  • Page 64: Performance Management Menu

    User Manual LTU Orion 3 4.6.3 Performance Management Menu After typing “1” in the main menu and pressing <enter>, the following message is displayed: Performance management activated Enter 'M' to return to MAIN, or 'H' for HELP information CO_01_PM> 4.6.3.1 <H> Command Type <H>...
  • Page 65 User Manual LTU Orion 3 Errored Seconds (ES) – A second period with one or more errored blocks or at least one defect. Severely Errored Seconds (SES) – A one-second period, which contains more than 30% of errored blocks per second from the total number of all received blocks. SES is a subset of ES.

  • Page 66: Allg826 N> Command

    User Manual LTU Orion 3 Option: С – update the table continuously. Digits 1, 2, 3 and 4 in the first row of the table indicate 1 and 4 E1 interfaces. CRC4 – Cyclic redundancy check indicate errored submultiframes received on the E1 side.

  • Page 67: Netstat [Lan/Wan]> Command

    User Manual LTU Orion 3 4.6.3.7 <NETSTAT [LAN/WAN]> Command This command shows the main network (LAN or WAN & MWAN) interface counters. CO_PM>NETSTAT LAN -------------------------------------------------------------------------------- Interface LAN1 LAN2 -------------------------------------------------------------------------------- Mode DOWN DOWN Octets Packets B/mcast Speed,kbit: Size 65-128 129-256 257-512 513-1024 >1024...

  • Page 68: Resetnetstat> Command

    User Manual LTU Orion 3 -------------------------------------------------------------------------------- Bad octets: Discards Undersize : Oversize Fragments : Jabber MAC error : Bad FCS FCS error : Deferred Collisions: .Late .Excessive: .Single .Multiple : Pause In pause Out pause : -------------------------------------------------------------------------------- CO_PM> Parameter Value...

  • Page 69: Linkalarm> Command

    User Manual LTU Orion 3 4.6.3.11 <LINKALARM> Command This command shows the actual alarm status for all units connected over SHDSL. ----------------------------------------------------------------------------- Local Alarm: Major ----------------------------------------------------------------------------- DSL 1 DSL 2 ----------------------------------------------------------------------------- RR01 Major Major ----------------------------------------------------------------------------- CO_PM>CO_PM> 4.6.3.12 <ALARMLOG [N]> Command This command displays the alarm log (list of all alarms that were detected) for the specified SHDSL interface.

  • Page 70: M> Command

    User Manual LTU Orion 3 Master / Slave Unit acts as Master modem Unit acts as Slave modem Noise Margin G.826(ES) Number of seconds with errors. According to G.826 Status Link is UP down Link is Down pre act Link is preparing for activation...

  • Page 71: Fault And Maintenance Management Menu

    User Manual LTU Orion 3 4.6.4 Fault and Maintenance Management Menu After typing “2” in the main menu and pressing <enter>, the following message is displayed: Fault and maintenance management activated Enter 'M' to return to MAIN, or 'H' for HELP information CO_01_PM>...

  • Page 72: Nm> & Command

    User Manual LTU Orion 3 ------------------------------------------------------------------------------- CX_06_FMM> 4.6.4.2 <NM> & <LINKNM> Command The <NM> command displays the ITU-T G.991.2 Noise Margin. It means the maximum possible increase in the Noise Margin for which the BER is expected to be not less than 10 [dB].

  • Page 73: Status Eth> Command

    User Manual LTU Orion 3 Active sync. source External External sync Е1-1 network interface E1-1 Е1-2 network interface E1-2 Е1-3 network interface E1-3 Е1-4 network interface E1-4 Internal Internal sync source Remote Power State 120V,ON Remote Power Source switched on Remote Power Source switched off Unit temperature [С]...

  • Page 74: Status Radius> Command

    User Manual LTU Orion 3 4.6.4.7 <STATUS RADIUS> Command The <STATUS RADIUS> command displays the actual status of RADIUS servers CO_FMM>STATUS RADIUS ---------------------------------------------------------------------------- Status Server 1 Server 2 ---------------------------------------------------------------------------- Status Connected Not connected Server IP 255.255.255.255 255.255.255.255 Server port 1812...

  • Page 75: Loop1 On/Off [N=1..4]> Command

    User Manual LTU Orion 3 Parameter Description Destination Name of WAN channel Status The physical channel where logical WAN channel operate. Can be either DSL or E1. Enabled Shows if encoding is enabled or disabled on this channel. Remote Status of remote unit:...
  • Page 76 User Manual LTU Orion 3 -------------------------------------------------------------------------------- LOS-E : off HW-F : off DSL-F : off SW-MNT : off -------------------------------------------------------------------------------- Option: T – enable the continuous updating of the table with actual alarm status. Definitions (E1 interface) Loss of signal on the Е1 side...

  • Page 77: Mactable> Command

    User Manual LTU Orion 3 Table 4.3 <ALARM> definitions 4.6.4.13 <AСO [GROUP ON/OFF])> Command The <AСO> command (Alarm Cut Off) without additional parameter shows deactivated alarm indications (LED and relays). CO_FMM>ACO ETH1, ETH2, ETH3, ETH4 CO_01_FMM> The <ACO [GROUP ON/OFF]> command activates/deactivates a GROUP for alarm indications.

  • Page 78: Lldp Stat [If/All]

    User Manual LTU Orion 3 The command MACTABLE OTHER shows the entries for OTHER VLANs (with VID not matching one of VLAN 1..8. First column is the MAC address. The second column is the originating interface where this MAC is learned from. Third column is VLAN number. Forth column indicates if MAC address is blocked.

  • Page 79: Startal [N]> Command

    User Manual LTU Orion 3 4.6.4.16 <STARTAL [N]> Command This command starts/stops (toggles) the analogue loop back at the SHDSL line interface on the device with the number N. For single-channel devices this command is entered without the parameter N.

  • Page 80: Diff N/R/S/B N/R/S/B> Command

    User Manual LTU Orion 3 4.6.4.22 <DIFF N/R/S/B N/R/S/B> Command This command displays differences between up to four configurations: New, Running, Startup, or Backup. CO_FMM>DIFF R B ------------------------------------------------------------------------ Running configuration Backup configuration ------------------------------------------------------------------------ VLAN.VLANMASK.3 00 01 | 00 07 ------------------------------------------------------------------------ CO_FMM>...

  • Page 81: Load> Command

    User Manual LTU Orion 3 ------------------------------------------------------------------------ The results of the command show the coded configuration of the device and can be copied from the terminal window into the notepad as well as saved on any data carrier. This txt file can be downloaded into a similar device with the help of the LOAD command via the XModem or 1K XModem protocols.

  • Page 82: Tlm S [N:[Rnn-Rkk]] [Abc]> Command

    User Manual LTU Orion 3 RR09 | MAJ MAJ | MAJ MAJ | MAJ MAJ | MAJ MAJ | RR10 | MAJ MAJ | MAJ MAJ | MAJ MAJ | MAJ MAJ | RR11 | MAJ MAJ | MAJ MAJ | MAJ...

  • Page 83: Log> And [Log C] Command

    User Manual LTU Orion 3 especially the AC Mains alarm indicates that there is some longitudinal AC noise, probably from industrial facility, train passing by, bad grounding or direct power contacting. To track down the AC noise source and frequency, press '1' to show spectrum analysis of the common-mode noise.

  • Page 84: Tftp [Cmd] [Arg1][Arg2]> Command

    User Manual LTU Orion 3 Flash manufacturer: Spansion Flash device: S29AL016D(02) Start address: 0x1000000 Flash size: 2048 KB Now upload program via XModem or 1K XModem CСС After the new software is successfully downloaded a message is displayed to restart the modem.

  • Page 85: Softinfo> Command

    User Manual LTU Orion 3 4.6.4.32 <SOFTINFO> Command This command displays some information about the software, which are stored in the current device. Any device can have two stored software copies (different versions are possible). One copy of the software is started after switching power on, while the other is a backup software.

  • Page 86: Sd Save [N=0..9]> Command

    User Manual LTU Orion 3 4.6.4.38 <SD SAVE [N=0..9]> Command The <SD SAVE> command generates a configuration file and saves it to the SD card. The SD SAVE <CR> generates the STARTUP.CFG file while SD SAVE x<CR> generates the desired PROFILEx.CFG file.

  • Page 87: H> Command

    User Manual LTU Orion 3 4.6.4.43 <H> Command Type <H> and the monitor lists all available commands in the BERT sub-menu. If you type H [command] you will get additional help on [command]. CX_BERT>H ------------------------------------------------------------------------------- Type 'H [command]' to get additional help on [command]...

  • Page 88: Configuration Management Menu

    User Manual LTU Orion 3 4.6.5 Configuration Management Menu After typing “3” in the main menu and pressing <enter>, the following message is displayed: Configuration management activated Enter 'M' to return to MAIN, or 'H' for HELP information CO_01_CM> The content of the configuration management menu mainly depends on the operation mode of the device.

  • Page 89: Encode [Nrsb]> Command

    User Manual LTU Orion 3 PTMP [ADD|DEL] [IF] Add/delete interface to PTMP network PTMP SHOW Show interfaces of PTMP network MODE [N] Switches number of DSL channels to N LICENSE Show active licenses LICENSE ADD [key] Add software options Network configuration menu...

  • Page 90: Encode [On/Off] [N]> Command

    User Manual LTU Orion 3 4.6.5.4 <ENCODE [ON/OFF] [N]> Command This command activates or deactivates link-layer encryption on selected WAN channel [N]: CO_01_CM>ENCODE ON 1 -------------------------------------------------------------------------------- Encoding WAN1 WAN2 WAN3 WAN4 -------------------------------------------------------------------------------- Destination : DSL1 DSL2 DSL3 DSL4 Enabled -------------------------------------------------------------------------------- Warning: New Encoding configuration is shown, because it differs from running.
  • Page 91 User Manual LTU Orion 3 USER [username] [IP] [net] Set the IP range for user USERNAME. Net should be in range from 0 to 32. If no IP is set, no restrictions are applicable. USER [username] LOCAL Disable remote access for user USERNAME. This command is equal to USER [username] 0.0.0.0 32.
  • Page 92 User Manual LTU Orion 3 RESETNETSTAT :LANC All commands from MACTABLE C LAN + reset of Ethernet counters and MAC table CONFIG COSCONFIG CONFIG :VIEW Displaying of NETCONFIG RSTP CONF device configuration DEFAULT E1CLOCK :LINK All commands AUTO E1MODE from VIEW +line,...

  • Page 93: Password {Users}> Command

    User Manual LTU Orion 3 The USER [USERNAME] [IP] [netclass] command is used to define the IP domain. The USER [USERNAME] ALL command is used to allow access from all IP addresses. The USER [USERNAME] LOCAL command is used to disable access from all IP addresses.
  • Page 94 User Manual LTU Orion 3 Extended rates Extended DSL feature ON/OFF Line coding Type of the line encoding (PAM128, PAM64, PAM32, PAM16, PAM8, PAM4) Data Transmission Rate on SHDSL line (BR*64kbit/s). Auto – adaptation mode Baserate Annex Transmission Mode (ANNEX A, ANNEX B, ANNEX AB)

  • Page 95: Master On/Off [N = 1..4]> Command

    User Manual LTU Orion 3 Presentation of CONFIG table in “independent channels with reservation” mode. In this configuration, channels 1, 2 and 3, 4 are combined for reservation (CO, CP, CX). CO_09_CM>CONFIG -------------------------------------------------------------------------- Running Line Configuration -------------------------------------------------------------------------- SHDSL DSL1 DSL2...

  • Page 96: Baserate K/Auto [N=1..4]> Command

    User Manual LTU Orion 3 PAM 16 PAM 16 PAM 32 PAM 32 PAM 64 PAM 64 PAM 128 PAM 128 4.6.5.13 <BASERATE K/AUTO [N=1..4]> Command This command sets the transmission rate K to the line SHDSL interface, where N is the number of the SHDSL interface.

  • Page 97: Annex A/B/Ab [N=1..4]> Command

    User Manual LTU Orion 3 4.6.5.16 <ANNEX A/B/AB [N=1..4]> Command This command enables the transmission standard G.991.2 ANNEX A or ANNEX B, where N is the number of the SHDSL interface. The ANNEX AB automatically selects the transmission standard. Note: If devices use different transmission standards, synchronization will not be established between them.

  • Page 98: G704 On/Off [N]> Command

    User Manual LTU Orion 3 To configure two reserve groups type the command as follows. Note that groups should not use same channels. CO_01_CM>RESERVE 1,2 3,4 The parameter NONE deactivates reservation. CO_01_CM>RESERVE NONE 4.6.5.20 <G704 ON/OFF [N]> Command This command activates/deactivates the ITU-T G.704 framed mode for the Е1 interface with number N.

  • Page 99: E1Mode [Hdb3/Ami] [N]>, Commands

    User Manual LTU Orion 3 E1CLOCK RX: E1 input clock E1CLOCK EXT: External input clock. E1CLOCK INT: Internal input clock. 4.6.5.26 <E1MODE [HDB3/AMI] [N]>, <E1MODE [SHORT/LONG] [N]> Commands This command sets the E1 line coding to AMI or HDB3. And additionally it sets with short/long the receiver sensitivity.

  • Page 100: Gscompat On/Off> Command

    User Manual LTU Orion 3 4.6.5.33 <GSCOMPAT ON/OFF> Command This command sets the Globespan (Conexant) compatibility mode on/off. This feature will also limit the baserate to 36 (PAM16). 4.6.5.34 <NMTHR> Command The <NMTHR> command allows to setup the desired Noise Margin alarm threshold in dB.

  • Page 101: License> Command

    User Manual LTU Orion 3 After the reset unit will work with specified number of SHDSL channels. 4.6.5.40 <LICENSE> Command This command shows the active licenses. CP_01_CM>LICENSE Current license status: Extended PAM and baserates: Not activated 4.6.5.41 <LICENSE ADD> Command This command activate a special functionality added by a license KEY, that you can get from the manufacturer.
  • Page 102 User Manual LTU Orion 3 BREAK: Allows to switch ON/OFF the transmission of the BREAK condition. ON means to ransmit BREAK conditions through RSIP, OFF ignore the BREAK conditions. In this case BREAK conditions will appear as zero bytes in data stream.
  • Page 103 User Manual LTU Orion 3 TCP Point to Point COM Server...

  • Page 104: Rsrate [N]> Command

    User Manual LTU Orion 3 4.6.5.43 <RSRATE [N]> Command This command sets the bitrate of the serial interface. CP_01_CM> RSRATE 115200 4.6.5.44 <RSFORMAT [Format]> Command This command defines the RS-232/RS-485 data format. [Format] means: Data bits: 5..8 Parity: N, E, O, M, S •...

  • Page 105: Ioip {Option} [If]> Command

    User Manual LTU Orion 3 CO_01_CM>EXTCLOCK INT CO 4.6.5.49 <IOIP {OPTION} [IF]> Command The IOIP command configures Input/Output (IO) signal transmission over IP-based networks running over DSL, Ethernet or E1 channels. <IOIP INSENSITIVITY [TIME]> Command This command defines the sensitivity of an Input signal in milliseconds. Signal shorter than INSENSITIVITY value will not be detected.
  • Page 106 User Manual LTU Orion 3 Interface: IN-1 ... IN-8 or OUT-1 ... OUT-8 Local port always connected with management IP address of the device. <IOIP REMOTE [IP:PORT] [IF]> Command This command defines remote IP address and IP port number a local interface should be connected with.

  • Page 107: Net> Command

    User Manual LTU Orion 3 IO1: 10.73.8.4:8000 IO1: 10.73.8.4:8000 IOIP Client IOIP Client IO2: 10.73.8.5:8000 IO2: 10.73.8.5:8000 IO3: 10.73.8.6:8000 IO3: 10.73.8.6:8000 10.73.8.1 10.73.8.3 IOIP SERVER OUT-1 IOIP LOCAL 8000 OUT-1 IOIP REMOE ANY OUT-1 Network IOIP SERVER OUT-1 IOIP SERVER...

  • Page 108: Netconfig [N/R/S/B]> Command

    User Manual LTU Orion 3 IRATE [speed/OFF] [N=1-5]Set LAN port ingress rate limit ERATE [speed/OFF] Set modem egress rate limit CRATE [speed] [CoS] [WAN]Set COS egress rate limit COS [QOS/VLAN] [N] [0..3/OFF]Set QoS/VLAN to COS mapping SNMP [V1|V2C|V3] [ON|OFF]Activate support for SNMP v1, v2c, v3...
  • Page 109 User Manual LTU Orion 3 Speed : AUTO AUTO AUTO AUTO AUTO Flow control System settings IP address 192.168.1.6 MAC address 00:0f:d9:04:a7:25 Subnet mask 255.255.255.0 Management MTU 1500 Default gateway : 192.168.1.254 WAN idle pattern: All 1's SNMP SNMP versions...

  • Page 110: Cosconfig [N/R/S/B]> Command

    User Manual LTU Orion 3 Services List of running management servers Syslog servers First and Second Syslog server IP address SNTP servers First and Second SNTP server IP address Time Zone settings Summer Time Summer Time change settings Winter Time...

  • Page 111: Rstp Default> Command

    User Manual LTU Orion 3 4.6.5.54 <RSTP DEFAULT> Command RSTP DEFAULT command restores factory settings for RSTP subsystems: • All RSTP instances are disabled; modem works like it has no RSTP system. • Each system interface has priority 128 (0x80) •...

  • Page 112: Rstp [A..e] Hello [2..10]> Command

    User Manual LTU Orion 3 4.6.5.58 <RSTP [A..E] HELLO [2..10]> Command This command selects time interval between two consecutive RSTP service messages in seconds. It means that BPDU packets will be send every HELLO time. Default value is 2 seconds.

  • Page 113: Rstp [Iface] Ma [6..40]

    User Manual LTU Orion 3 4.6.5.60 <RSTP [IFACE] MA [6..40] This parameter sets Maximum Age parameter. According to the IEEE 802.1D:2004 standard the Maximum Age parameter declares the node number in the chain, that will discard the BPDU packet that root-bridge sends. Every node in the chain will compare “Age” value in BPDU and will drop the packet if its “Age”...

  • Page 114: Rstp [Iface] Pcost [Auto/1..200000000]> Command

    User Manual LTU Orion 3 4.6.5.62 <RSTP [IFACE] PCOST [AUTO/1..200000000]> Command This command allows automatic path cost selection or allows manual settings. In automatic mode the value depends on the bit rate. The higher bit rate the lower path cost is. The port with lower path cost will be selected as root port.

  • Page 115: Rstp State> Command

    User Manual LTU Orion 3 RSTP configurations for whole device Port Base VLAN letter. Could be from A to E Status RSTP status for an instance. VLAN/VID Displays service VLAN number and VID for RSTP service messages Prio RSTP bridge priority...

  • Page 116: Rstp Diag> Command

    User Manual LTU Orion 3 4.6.5.66 <RSTP DIAG> Command The <RSTP DIAG> command shows RSTP diagnostics per interface. It displays what RSTP priority and what MAC address switch receives and what MAC address / RSTP priority it advertises to its neighbours.

  • Page 117: Mode [If] [Acc/Trunk/Mix]> Command

    User Manual LTU Orion 3 PBVLANs are used as a way to isolate groups of network interfaces from each other. No frames from interface LAN2 connected to PBVLAN A will ever be forwarded to interface INT, which is connected to PBVLAN E. And vice versa.

  • Page 118: Qos [If] [0..7]> Command

    User Manual LTU Orion 3 There are 8 separately managed VLANs in the modem. For each managed VLAN the VID (VLAN ID) can be selected with the VID command. 4.6.5.70 <QOS [IF] [0..7]> Command This command sets default QoS for interfaces in ACCESS or MIXED mode ([IF] is LANx, INT).

  • Page 119: Maclist [If] Add [Mac]> Command

    User Manual LTU Orion 3 BLOCK: port will be blocked upon receiving of non-listed packet and SNMP Trap will be generated White list List of allowed MAC addresses per interface The <MACLIST SHOW [N/R/S/B]> command displays, depending on the parameter, one of four configurations: New, Running, Startup, or Backup.

  • Page 120: Macfilter [Lan1-5] [On/Off]> Command

    User Manual LTU Orion 3 4.6.5.76 <MACFILTER [LAN1-5] [ON/OFF]> Command The <MACFILTER [LAN1-5] [ON/OFF]> command enables or disables MAC Filter option on selected LAN interface. CX_05_NET>MACFILTER 4 OFF -------------------------------------------------------------------------------- MAC Filter Configuration -------------------------------------------------------------------------------- Port LAN1 LAN2 LAN3 LAN4 LAN5 Mode...

  • Page 121: Setip X.x.x.x> Command

    User Manual LTU Orion 3 DOT1X [LAN1-5] [ON/OFF] Enables or disables 802.1x option on selected port DOT1X [LAN1-5] [SHOST/MHOST/MAUTH] Sep 802.1X working mode DOT1X parameter Parameter Description Default parameter. Only one host (MAC address) can be authenticated on a port. If one host passed authentication, requests from other hosts will be SHOST ignored.

  • Page 122: Fc [On/Off] [N1-4]> Command

    User Manual LTU Orion 3 4.6.5.85 <FC [ON/OFF] [N1-4]> Command This command enables and disables IEEE 802.3x flow control on LAN ports. 4.6.5.86 <IRATE [speed/OFF] [N1-4]> Command The command IRATE is an abridgement of the Ingress Rate. It limits the incoming data stream that reaches the internal Hardware Ethernet Switch.

  • Page 123: Erate [Speed/Off]> Command

    The command CRATE is an abridgement of CoS Rate. It limits the egress bandwidth of selected CoS queue for specified WAN interface. Starting from the 1.3.0 firmware FlexDSL Orion3 and MiniFlex devices have 4 CoS queues with numbers from 0 to 3. The queue with “0” number has...

  • Page 124: Cos [Qos/Vlan] [N] [0..3/Off]> Command

    User Manual LTU Orion 3 intended to define QoS [0…7] to CoS; or VLAN ID to CoS mapping. On the contrary, it is designed for assigning bandwidth each CoS queue can occupy. Only CRATE command can be used if incoming traffic has VLANs, IRATE command is useless because the hardware Ethernet switch can’t check the QoS filed on its entry point.

  • Page 125: Trap [1/2] [V1/V2C]> Command

    User Manual LTU Orion 3 4.6.5.93 <TRAP [1/2] [V1/V2C]> Command This command defines SNMP version of Trap messages for 1-s or 2-nd Trap receiver. <TRAP 1 V1>. This command set SNMP version to v1 for 1-st Trap receiver. <TRAP 2 V2C>. This command set SNMP version to V2c for 2-nd Trap receiver.

  • Page 126: Snmp [Ro|Rw] Priv [Mode]> Command

    User Manual LTU Orion 3 4.6.5.99 <SNMP [RO|RW] PRIV [MODE]> Command This command set SNMPv3 user encryption type for RO or RW user. The following encryption types are supported: DES,AES,NONE. <SNMP RO PRIV DES>. This command set DES encryption type for SNMP user with Read-Only access rights.

  • Page 127: Lldp [Param] [Value]> Command

    User Manual LTU Orion 3 LLDP internal VLAN Enabled 4.6.5.103 <LLDP [PARAM] [VALUE]> Command This command allows [VALUE] setup for selected LLDP parameter [PARAM] Parameter Value Description TXINT 5..32768 Sets Retransmission Interval in seconds TXMULT 2..10 Sets Transmission Multiplier REDEL 1..10...

  • Page 128: Lldp Config> Command

    User Manual LTU Orion 3 customer modem and the modem will "see" the service-provider switch. Despite the fact that such behaviour fulfils the standard, it may conflict with some network construction principles like security. Moreover the customer will not see own remote equipment as it is not connected directly, on the contrary through the service-provider cloud.
  • Page 129 User Manual LTU Orion 3 Pre-defined time change rules are: Name Rules Description MAR SUN>=8 (9 ) 02:00w +60min Canada NOV firstSUN (2 ) 02:00w +0min OCT SUN>=15 (19) 00:00w +60min Brazil FEB SUN>=15 (16) 00:00w +0min SEP lastSUN (28) 03:00w +60min...
  • Page 130 User Manual LTU Orion 3 APR firstSUN (6 ) 02:00s +0min MAR lastSUN (30) 01:00u +60min OCT lastSUN (26) 01:00u +0min European Union MAR FRI>=23 (28) 02:00w +60min Zion OCT lastSUN (26) 02:00w +0min MAR lastSUN (30) 00:00w +60min E-Eur...

  • Page 131: Ssh|Telnet|Http|Https] [On/Off]

    User Manual LTU Orion 3 Day [lastSUN] : FIRSTMON Time to advance the clock [00:00] : 02:00 Offset (relative to Standard zone time) [60 min] : 1:00 4.6.5.110 <[SSH|TELNET|HTTP|HTTPS] [ON/OFF]> Command allows enabling or disabling of defined service. CO_04_NET> SSH ON...

  • Page 132: Radius [1/2] Secret

    User Manual LTU Orion 3 YDD7M91EduzyvaR6HcCt9Oq34BadXRl79AbH+dAVHgVHjHoz252GhF8HqmnJEVyD DK9sUOT+lsBmXdolTzZxOF6JgfA4CH6xY63ZyRNAP3encxXbnw0WnVmfGpDvtEv+ M0eFfO5s28mRCLTZ9sPORK21Z4HSAyQ4U9SDUGI9Sii0arIjWxzjzYy7yTyw8bws iomMVQcBAoGBAP2fiqSCfm1nKiN7YNMdoPBRzfyyFMTIsZVw9RxjDTIBNJrFfqEu n2qzzOmfO6t1QuIxKogBfJB6HuSI+TZHCB9H5tj2FAficaNzFnULYax8vE9Anbur G3oSFpraiMXdB0YcOh15QpUC/8ihoGEjUHhl5m23MYEUSLq8RV/af4EfAoGBAN1W 29AudpSBpXRC0+zmmGVOTnhP6oJyS0enExqDryPkBq/zB5J1Lfa01iFTgjp5PJyO up04gQ1hV6h/SHjc7L6SSeFUSlI5CjubldQEHf8tMK1ntjGWkoX8c3gizlC9gxZq jLTtaHTSR6cBqZzwx5snbhNsn08UT6D1qm3e32HBAoGADi/of39VNyV4M/fo2KZl pEvPK/2CL+fSFzv0WhwoVs2+dZHqnXWQMVXRdpgTrGmoziJV8Lm0kBhktf/7gM/E YouRHD3XrQE7vhrn/LAgTJfFqOFCcYcGyHNOlGb5E6hjicZ2ccOgt9ktGboA0K47 CCEbHLQMrt3Fm7yAXPZJ/50CgYACAZGId4NXoT0wqpJlKUnkUStg58iGWibYhWkk 6mCiAKUW3ysIZst92vG955XcldC40opadnKk/mbe/hhYEBiNOaI1yp/J0v6Gv8hB 3a+v6mbwi2oZVPYLBNi/FAGutakEgP65fRVfSbCgkOFKrNwCSf8zad6fxt1Z5iAf Us/PgQKBgCY0kaOq4TJK6BJBwxoTIBwaq8DNK+ClxMtaBHrGohD3d4hRNWEQ2ARM k77rHJ8kYlTR+apbJTWhRsaoodVXeSjEQ/2ZHBbi5NsWX/K1pG8tOMFn13wnI9RA adw0Lmu4tOLTEhHbczXd7Lf50LXDV5PuAFkvNppM1En0sCOPJZVf -----END RSA PRIVATE KEY----- > 1676 bytes Usage: SSL [SHOW/DEL] [CERT/KEY/CA] Parameter Description SHOW/DEL To display or to delete the item...

  • Page 133: Radius Retries [0..10]

    User Manual LTU Orion 3 -------------------------------------------------------------------------------- Running Network Configuration <------------------------------------- cut ------------------------------------> Service settings Running/Port : TELNET, SSH(2022), HTTP Syslog servers : 255.255.255.255 255.255.255.255 SNTP servers : 255.255.255.255 255.255.255.255 RADIUS servers : 192.168.1.1:1812 255.255.255.255:1812 RADIUS secret : entered entered -------------------------------------------------------------------------------- CO_04_NET>RADIUS 2 192.168.2.253:21812...

  • Page 134: Netdefault> Command

    User Manual LTU Orion 3 CO_06_FMM>STATUS RADIUS -------------------------------------------------------------------------------- Status Server 1 Server 2 -------------------------------------------------------------------------------- Status Not connected Connected Server IP 192.168.1.252 192.168.1.254 Server port 1812 1812 Server key entered entered Retries Timeout,seconds -------------------------------------------------------------------------------- CO_06_FMM> Parameter Description Status Status of 1-st and 2-nd RADIUS Server...

  • Page 135: Software Download

    User Manual LTU Orion 3 5 SOFTWARE DOWNLOAD Orion3 devices support downloading new/old software versions to get some additional features or to protect the devices with a released only software version. The download of the software can be performed in following ways: •...
  • Page 136 User Manual LTU Orion 3 5. Select “Select Device” in the “Setting” menu, then select “FG-PAM” and click “Ok”. 6. Select the “xxx.SSS” file and click “Open”.
  • Page 137 User Manual LTU Orion 3 7. Select “Connect COM” in the “Action” menu. 8. Power on the device (activate). You may insert the unit to the subrack, minirack or UTTx housing. 9. Click “Yes” in the “Flashloader” window.
  • Page 138 User Manual LTU Orion 3 10. The loading progress will be displayed in the window “Flash Loader: Send Panel”. 11. If the downloading was successful, the following window will be displayed. 12. Click “Ok”. 13. Select “Disconnect COM” in the “Action” menu.

  • Page 139: Software Download Via Rs-232 Com Port (Lct) Using Xmodem Protocol

    User Manual LTU Orion 3 Software Download via RS-232 COM Port (LCT) Using Xmodem Protocol To download the software on any Orion3 device, do the following steps: 1. Power on the device. 2. Connect the RS-232 connector of the device (Monitor, LCT) with the Com port (RS-232) of the Personal Computer.
  • Page 140 User Manual LTU Orion 3 6. Configure the parameters of the COM port (COM properties). Click “Оk”. Bits per second:9600, Data bits: 8, Parity: None, Stop bits: 1, Flow control: None 7. Select Properties in the “File” menu of the HyperTerminal program.
  • Page 141 User Manual LTU Orion 3 9. Select Call in the “Call” menu. (If the menu is not available, the connection is established automatically. Go to item 10.) Enter %SN, where SN is the slot number in the Subrack. For UTT1 and Minirack enter %01.

  • Page 142: Software Download Via Ethernet (1K-Xmodem And Telnet)

    User Manual LTU Orion 3 13. Select 1K-Xmodem in the “Protocol” drop-down menu of the “Send File” window. Browse the app.bin file in the “Filename” field (the name of the file depends on the software version). Click “Send”. The Hyper Terminal starts downloading the file. After the download is fully completed, the device stores the downloaded file into the memory.

  • Page 143: Service Instructions

    User Manual LTU Orion 3 6 SERVICE INSTRUCTIONS General Requirements • Before unpacking, check if the packing box is intact and if the equipment model is equal to that specified in the purchase order/contract. • Before running the device, read carefully the present technical description and service instructions.
  • Page 144 (LOOP1) and G.826 statistics of E1 interfaces. If LOOP1 is activated on this network interface and the G826 statistics displays errors, a conclusion can be made that the E1 network interface of the FlexDSL Orion3 system is configured improperly or there is a malfunction.

  • Page 145: Appendices

    User Manual LTU Orion 3 7 APPENDICES Quick Installation Guide for Orion3 LTU Devices 7.1.1 Enter an Orion3 Device To enter in a subrack unit, use the Monitor (LCT, RS-232) interface with Hyper Terminal (or any equal program) or go with Telnet through the Ethernet interface.
  • Page 146 User Manual LTU Orion 3 Subrack Unit: Enter in a subrack unit with the Monitor (LCT, RS-232) or Telnet interface. Type following commands Description Go to Configuration Management (CM) 3 <> <DEFAULT EVERYTHING> <> Set everything to default configuration Configure SHDSL 1 as MASTER <MASTER ON 1>...
  • Page 147 User Manual LTU Orion 3 UTT1 Unit: Enter in a UTT1 unit with the Monitor (LCT, RS-232) or Telnet interface. Type following commands Description Go to Configuration Management (CM) 3 <> <DEFAULT EVERYTHING> <> Set everything to default configuration Configure SHDSL 1 as SLAVE <MASTER OFF 1>...

  • Page 148: Checking Of Correct Working

    User Manual LTU Orion 3 ATTENTION DON’T FORGET TO WRITE THE CONFIGURATION IN THE STARTUP CONFIGURATION WITH THE FOLLOWING COMMANDS: 2 <> Go to Fault and maintenance management (FMM) Apply all configurations (written in the running config.) <APPLY ALL> <>...

  • Page 149: Connector Description

    User Manual LTU Orion 3 Connector Description 7.2.1 Ethernet Connector Type – RJ-45 (female), 8 pins. Pin No. Description Tx+ (transmit data) Tx- (transmit data) Rx+ (receive data) NC (not used) NC (not used) Rx- (receive data) NC (not used) NC (not used) 7.2.2 SHDSL Connector...
  • Page 150 User Manual LTU Orion 3 Type – RJ-45 (female), 8 pins. Pin No. Description E1 Input → CH1/2 Wire A E1 Input → CH1/2 Wire B NC (not used) E1 Output → CH1/2 Wire A E1 Output → CH1/2 Wire B...

  • Page 151: E1 75 Ohm Connector

    User Manual LTU Orion 3 Please order FG-ADAPT-E1B/2xRJ45 to convert DB-15 connector to 2x RJ-45 (female) connector. 7.2.4 E1 75 Ohm Connector Type - BNC 75  (Please order FG-ADAPT-E1B/E1U to convert RJ-45 connector to BNC) 7.2.5 Nx64, RS-232 and G.703/E0 Connector Type –...
  • Page 152 User Manual LTU Orion 3 Signal Element Timing (B) Signal Ground (102) This connector description is only correct with the Nx64 daughter board. Type – DB-26H (D-Sub High Density, female), 26 pins. Pin No. Signal RS-232 Description Direct. Data Terminal Ready...
  • Page 153 User Manual LTU Orion 3 Type – DB-26H (D-Sub High Density, female), 26 pins. Pin No. Signal RS-485/422 Description Direct. TXD+ TXD/RXD+ Transmit Data + RXD+ Receive Data + TXD- TXD/RXD- Transmit Data - RXD- Receive Data - Signal Ground...
  • Page 154 User Manual LTU Orion 3 Type – DB-26H (D-Sub High Density, female), 26 pins. Pin No. Signal G.703/E0 Description Direct. RXD+ Receive Data + RXD- Receive Data - TXD+ Transmit Data + TXD- Transmit Data - Signal Ground Signal Ground...
  • Page 155 User Manual LTU Orion 3 FG-CAB-N21-OR3-DTE Cable Orion3 Nx64 to X.21, DB26MH to DB15F, DTE, 1.0m, UL2464, AWG-28, OD=5mm FG-CAB-N35-OR3-DCE Cable Orion3 Nx64 to V.35, DB26MH to MRAC34M, DCE, 1.0m, UL2464, AWG-26, OD=8.5mm FG-CAB-N35-OR3-DTE Cable Orion3 Nx64 to V.35, DB26MH to MRAC34F, DTE, 1.0m, UL2464, AWG-26, OD=8.5mm...

  • Page 156: Monitor (Lct, Local Craft Terminal) Connector (Acu, Minirack, Uttx)

    User Manual LTU Orion 3 FG-CAB-N36-OR3-DTE Cable Orion3 Nx64 to V.36, DB26MH to DB37F, DTE, 1.0m, UL2464, AWG-26, OD=6mm FG-CAB-RS232-OR3-DTE Cable Orion3 RS-232, DB26MH to DB9F, DTE, 1.0m, UL2464, AWG-28, OD=5mm 7.2.6 Monitor (LCT, Local Craft Terminal) Connector (ACU, Minirack, UTTx) Type –...

  • Page 157: Digital Input / Output Interface (4I4O) Connector

    User Manual LTU Orion 3 7.2.7 Digital Input / Output Interface (4I4O) connector Type – DB-26H (D-Sub High Density, female), 26 pins. Pin No. Signal Description Direct. IN1a Input 1 a IN1b Input 1 b IN2a Input 2 a IN2b...

  • Page 158: Technical Specification

    User Manual LTU Orion 3 8 TECHNICAL SPECIFICATION Interfaces 8.1.1 SHDSL Line Interface Specification ITU-T G.991.2-G.shdsl, ITU-T G.991.2-G.shdsl.bis Line Code TC-PAM16/32, Extended: TC-PAM4/8/64/128 Impedance 135 Transmit Power 13.5 (Annex A) or 14.5 (Annex B) dBm @ 135 Number of Pairs...

  • Page 159: Monitor Or Local Craft Terminal (Rs-232) Interface

    User Manual LTU Orion 3 Isolation 1500 Vrms 8.1.5 Monitor or Local Craft Terminal (RS-232) Interface Specification EIA-232 / V.28 Data Rate 9600 baud, asynchronous Protocol 8 bit, no parity, 1 stop bit , flowcontrol none, no linefeed with carriage return Signal Level V.28...

  • Page 160: Environment

    User Manual LTU Orion 3 Environment 8.3.1 Climatic Conditions (-25C … +55C) Storage: ETS 300 019-1-1 Class 1.2 (-40C … +70C) Transportation: ETS 300 019-1-2 Class 2.3 (-5C … +45C) Operation: ETS 300 019-1-3 Class 3.2 Higher Operation Temperature range available on request (-20°C … +80°C) 8.3.2 EMC and Safety Standards...

This manual is also suitable for:

Orion 3

Table of Contents