Advertisement
SHDSL.bis
Up to 60Mbps
Ddd
E1 / Nx64 /Ethernet
FlexDSL Orion3
The FlexDSL Orion3 product family offers a broad range of products, which are based on the latest SHDSL.bis standards
(ITU-T G.991.2 & ETS TS 101 524) The FlexDSL Orion3 supports TC-PAM16/32 and the new TC-PAM4/8/64/128 line coding.
The FlexDSL Orion3 allows symmetrical data and voice transmission at speeds up to 15.2Mbps over a single pair of copper.
In addition, the FlexDSL Orion3 supports DSL channel bonding for up to 4 copper pairs in order to achieve speeds to
60.8Mbps. The SFP module (available on selected models) allows Ethernet data transmission over mixed Copper and Fiber
media.
FlexDSL Orion3 SHDSL.bis Extended modems can provide up to 2 E1 interfaces, which support framed and unframed
services (G.703/G.704). An integrated 2 or 4 port Ethernet layer 2 managed Switch with VLAN support (10/100BaseT)
ensures connectivity to IP services. Beside of E1 and Ethernet the additional Nx64 interfaces can be configured as V.35, V.36,
X.21, V.28, or RS232/RS485 interface (cable selectable).
Like all FlexDSL Orion products, the Orion3 SHDSL.bis modems family is based on industrial components, have extended
temperature range, advanced surge protection and produced in Switzerland.
Possible Applications
a)
b)
FlexDSL Telecommunications AG
Steinackerstrassse 31
8902 Urdorf
Switzerland
Features
•
Up to 15Mbps Data Transmission per Copper Pair
•
SHDSL and SHDSL.bis, TC-PAM16/32
•
Additional TC-PAM4/8/64/128 Available
•
1, 2 or 4 Copper Pairs Support
•
2 or 4 Port Ethernet Switch (10/100BaseT)
•
SFP connector for mixed Copper and Fiber applications
•
QoS, VLAN and RSTP Support
•
E1 (G.703/704, Balanced/Unbalanced)
•
Nx64 (V.35, V.36, X.21, V.28) and RS-232/485
•
Multi-Service Operation
•
Point-to-Point and Point-to-Multipoint Operation
•
Console Port, Telnet, Web, SNMP Management
•
24/48VDC Powered, Low Power Consumption
•
Included Primary Protection
•
Robust DIN-Rail Metal Enclosure
•
Industrial Temperature Range Available
a) Ethernet Transmission Point-to-Point
b) Ethernet Transmission Point-to-Multipoint
c) Ethernet Add/Drop over a Long Copper Line
d) Ethernet Transmission over Copper and Fiber
Page 1/9
c)
d)
Tel: +41 44 741 52 90
Fax: +41 44 741 52 93
Email: info@flexdsl.ch
Web: www.flexdsl.ch
Advertisement
Table of Contents
Related Manuals for FlexDSL Orion3
Summary of Contents for FlexDSL Orion3
- Page 1 The FlexDSL Orion3 allows symmetrical data and voice transmission at speeds up to 15.2Mbps over a single pair of copper. In addition, the FlexDSL Orion3 supports DSL channel bonding for up to 4 copper pairs in order to achieve speeds to 60.8Mbps.
- Page 2 Press <ENTER>. Telnet through Ethernet Interface: Type in command line <Telnet 192.168.0.235> and press <ENTER>. This is the default Ethernet Address for Orion3 devices. After a successful entering the main menu of the device will be displayed. Configure an Orion3 Device A first installation example with the most important commands and points to care about is shown below.
- Page 3 <APPLY ALL> <> Apply all configurations (written in the running config.) <CONFIRM> <> Confirm all configurations (written in the startup config.) FlexDSL Telecommunications AG Tel: +41 44 741 52 90 Steinackerstrassse 31 Fax: +41 44 741 52 93 8902 Urdorf Email: info@flexdsl.ch...
- Page 4 8kV (Air discharge) NC (not used) Connector Type RJ45 Female, 8 pin NC (not used) NC (not used) FlexDSL Telecommunications AG Tel: +41 44 741 52 90 Steinackerstrassse 31 Fax: +41 44 741 52 93 8902 Urdorf Email: info@flexdsl.ch Switzerland Page 4/9 Web: www.flexdsl.ch...
- Page 5 TXD-3 RTS-3 TXD-4 RTS-4 RXD-3 CTS-3 RXD-4 CTS-4 PGND (Protection Ground) PGND (Protection Ground) FlexDSL Telecommunications AG Tel: +41 44 741 52 90 Steinackerstrassse 31 Fax: +41 44 741 52 93 8902 Urdorf Email: info@flexdsl.ch Switzerland Page 5/9 Web: www.flexdsl.ch...
- Page 6 Female, 3 pin Matching Type for Cable FK-MCP 1,5/ 3-STF-3,5 For AWG 16-28 Area 0.14–1.5 mm or Diameter 0.42-1.4 mm FlexDSL Telecommunications AG Tel: +41 44 741 52 90 Steinackerstrassse 31 Fax: +41 44 741 52 93 8902 Urdorf Email: info@flexdsl.ch...
- Page 7 Left Blinking = Data Connection not active Ethernet (1..4) Right 100 Mbit/s data rate 10 Mbit/s data rate FlexDSL Telecommunications AG Tel: +41 44 741 52 90 Steinackerstrassse 31 Fax: +41 44 741 52 93 8902 Urdorf Email: info@flexdsl.ch Switzerland Page 7/9 Web: www.flexdsl.ch...
- Page 8 EN 50121-4:2006/AC:2008 EN 61000-4-4:2012 EN 55022:2010/AC:2011 EN 61000-4-5:2014 EN 55024:2010 EN 61000-4-6:2014 EN 61000-4-2:2009 EN 61000-4-11:2004 FlexDSL Telecommunications AG Tel: +41 44 741 52 90 Steinackerstrassse 31 Fax: +41 44 741 52 93 8902 Urdorf Email: info@flexdsl.ch Switzerland Page 8/9...
- Page 9 2xDSL 2xETH 1xV24 18-230VDC FG-PAM-RAIL2N-485/2Eth-24V, V88 2xDSL 2xETH 1xRS-485 18-230VDC FG-PAM-RAIL2N-N64/2Eth-24V, V88 2xDSL 2xETH 1xN64 18-230VDC FlexDSL Telecommunications AG Tel: +41 44 741 52 90 Steinackerstrassse 31 Fax: +41 44 741 52 93 8902 Urdorf Email: info@flexdsl.ch Switzerland Page 9/9...