Troubleshooting - Soleus Air MAC-8000 Owner's Manual

TROUBLESHOOTING

Before seeking repair or service, please check the following:
PROBLEM
Unit does not operate or
only runs in fan mode.
Cooling efficiency is not
satisfactory.
Unit is noisy or vibrates.
Water Leaks from the
Unit.
The unit starts and stops
frequently.
POSSIBLE CAUSE
Is the unit plugged in?
Is the main power supply on?
Is the water bucket full indicator light on?
Is the water bucket installed correctly
Is the air inlet or outlet blocked?
Is there any other heat source in the room?
Are the air filters dirty?
Is the fan speed set at low?
Is the room too large for this unit?
Is the machine positioned unevenly on a level
surface?
Is the unit positioned on an uneven surface?
Was the unit moved before emptying the
bucket?
Is the stopper on the water drain pipe loose?
Is the voltage from the power source correct?
Is the exhaust hose positioned incorrectly?
REMEDY
Securely plug the power cord into the wall outlet.
Reestablish the main power supply.
Empty the water bucket.
Completely insert water bucket
Clear the blocking.
Move the heat source.
Clean the air filters.
Increase the fan speed.
This unit provides spot cooling or cooling for
rooms up to 150 sq. ft. with a standard 8 ft. ceiling.
Place the unit on a level surface.
Place the unit on a level surface
Empty the water bucket before moving the unit
and keep the unit upright at all times.
Make sure the stopper on the water drain is
securely in place.
Use a proper power source.
Position the exhaust hose correctly and keep the
exhaust hose straight as possible.
12