Signal Transmitter - Soleus Air SG-TTW-12HC Operating Instructions Manual

Air Conditioner Features(continued)

Signal transmitter

Remote control
ON/OFF
ON/OFF button
Press this button, the unit will be turned on,
●
press it once more, the unit will be turned
off. When turning on or turning off the unit,
the Timer, Sleep function will be canceled,
but the presetting time is still remained.
MODE
MODE button
Press this button, Auto, Cool,Save(Energy
●
Saver), Fan,Heat mode can be selected
circularly. Auto mode is default while
power on. Under Auto mode,the temperature
will not be displayed; Under Heat mode,
the initial value is 28 ℃
modes, the initial value is 25℃
AUTO
HEAT
AUTO
COOL
SAVE
FAN
HEAT (Only for cooling and heating unit.)
Note Be sure that there are no obstructions between receiver and remote controller;
:
Don't drop or throw the remote control; Don't let any liquid in the remote control and
put the remote control directly under the sunlight or any place where is very hot.
o ;Under other
82 F)
(
77 F)
o
( .
SAVE
COOL
FAN
SLEEP
SLEEP button
Press this button, Sleep On and Sleep
●
Off can be selected. After powered on,Sleep
Off is defaulted. After the unit is turned
off, the Sleep function is canceled. After
Sleep function set up, the signal of Sleep
will display. In this mode, the time of timer
can be adjusted. Under Fan and Auto
modes, this function is not available.
FAN
FAN button
By pressing this key, you may select AUTO,
●
FAN 1, FAN 2, FAN 3 or FAN 4, and may
also cycle between them. FAN 4 only in
cool, save and heat mode. After being
energized, AUTO is defaulted.
Fan 1
Fan 3
SWING
SWING button
Press this key to activate or deactivate
●
the swing.
7
Fan 2
Fan 4