Philips HR2094 Instructions For Use Manual page 12

ENGLISH
12
5 Select a speed or push one of the buttons (see section
'Control knob').
Let the appliance run for approx. 60 seconds.
Note: when you are processing a large quantity, we advise you not to put
B
all the ingredients in the filter at the same time. Start processing a small
quantity and let the appliance run for a few seconds.Then switch the
appliance off and add another small quantity. Repeat this procedure until
you have processed all the ingredients. Always keep the lid on the
blender jar during processing.
After using the filter
1 Switch the appliance off and remove the blender jar from the
motor unit.
C
2 Pour out the drink via the pouring lip of the blender jar. Make
sure the lid is placed on the blender jar in such a way that the
drink can be poured out through the strainer in the lid.
Do not remove the lid, the measuring cup and the filter.
◗ Make sure that you have assembled the lid in the right position so
that the drink is poured out through the filter in the lid.
For optimal results, put the jar with the remaining ingredients back
onto the appliance and let it run for a few more seconds.
3 Always clean the filter immediately after use.
Recipe
◗ Soy milk
For this recipe you need the filter.
Do not process more than one batch in a row. Let the appliance cool
down to room temperature before you continue processing.
Ingredients:
- 125g dried soy beans
- 1000ml water
Soak the soy beans for 4 hours before processing them.
B
Put the soaked soy beans in the filter. Pour 1000ml of water into the
B
blender jar and blend for 60 seconds, selecting the highest speed (MAX).
Pour the soy milk into a pan.
B
Bring the soy milk to the boil, then add sugar to taste and leave to
B
simmer until all the sugar has melted.
Serve hot or cold.
B