Philips HR2094 Instructions For Use Manual page 10

ENGLISH
10
C
2 Place the lid on the blender jar.
Close the lid by pushing it down firmly.
C
3 Insert the measuring cup into the opening in the lid.
4 Select a speed by turning the control knob or push one of the
quick-select buttons (see section 'Control knob').
5 Do not let the appliance run for more than 3 minutes at a
time.
After using the blender
1 Unplug the appliance.
2 Remove the lid with the measuring cup from the blender jar.
3 Remove the blender jar with the blade unit interface attached
from the motor unit.
C
4 Unscrew the blade unit interface from the bottom of the
blender jar.
5 Always clean the removable parts immediately after use.
Tips
- Cut meat or other solid ingredients into smaller pieces before
putting them in the blender jar.
- Do not process a large quantity of solid ingredients at the same time.
To get good results, we advise you to process these ingredients in a
series of small batches.
- To make tomato juice, cut the tomatoes in four and drop the pieces
through the opening in the lid onto the rotating blades.
Measuring cup
You can use the measuring cup to measure ingredients or to prepare
mayonnaise.
To prepare mayonnaise, you can punch a hole in the middle of the
B
bottom of the measuring cup with a knife or another sharp implement to
use the measuring cup as a funnel for adding oil when preparing
mayonnaise.The oil should be added very slowly to obtain the right