Table of Contents
Advertisement
Attach the clamps
3.3.2
1
Disassemble the clamps by unscrewing their front two bolts. Use a 4 mm Allen
wrench.
2
Place the two halves of the clamps around the front tubes of the wheelchair's
frame.
3
Lightly tighten the clamps by screwing on their two front bolts. You should still be
able to slide the clamp up and down the tube.
13
4
4
Advertisement
Table of Contents
Need help?
Do you have a question about the UNAwheel Mini Basic and is the answer not in the manual?