Safety information
2.1 ESD Guidelines
Basic protective measures against electrostatic discharge
● Make sure the grounding is good:
When handling electrostatic sensitive devices, ensure that your body, the workplace and
packaging are grounded. In this way, you can avoid becoming electrostatically charged.
● Avoid direct contact:
As a general rule, only touch electrostatic sensitive devices when this is unavoidable (e.g.
during maintenance work). Handle the devices without touching any chip pins or PCB
traces. In this way, the discharged energy cannot reach or damage sensitive devices.
Discharge your body before taking any necessary measurements on a device. Do so by
touching grounded metallic parts. Use only grounded measuring instruments.
18
SIRIUS 3RW30 / 3RW40
Manual, 10/2018, NEB535199502000/RS-AB/005