Important Safety Instructions - CardioChek 2750 User Manual

Important Safety Instructions

Warning
1. Only use the AC adapter provided with this printer, or an AC adapter that has been approved
for use with this printer. Use of an incorrect AC adapter may cause risk of overheating or fire.
2. Do not bend or place a heavy object on the power cord as it could damage the cord and result
in risk of electric shock or fire. Do not use the power cord if damaged or frayed.
3. The thermal print head may become quite hot after printing. Be careful when changing labels
and cleaning the thermal head.
Caution
1. Never insert objects of any kind into this printer as they may touch dangerous voltage points
or short out parts, and may result in a risk of fire or electric shock. Never spill liquid of any kind
on the printer.
2. This printer contains no user-serviceable parts. Do not attempt to service the printer yourself
as this can expose you to dangerous voltage points or other risks. Repair service should be
performed by a trained technician.
3. Do not use this printer near water or in extreme humidity.
4. Be sure to hold only the connector end of the power cord or interface cable when
disconnecting. Repeated pulling on the cable could damage the cable.
5. If any of the following conditions occur, turn off the printer and unplug the power cord from
the power outlet:
• The power cord is damaged or frayed.
• Liquid has been spilled into the printer or the printer has been exposed to rain or water.
• The printer does not recover from an error or the printer does not operate normally when
the operating instructions are followed.
• The printer exhibits a distinct change in performance, such as emitting a strange noise, odor,
or smoke.
6. Before using your printer, please remove the clear protective tape covering on the engine
cover and roll cover.
7. When the printer is unused for a period of time without a label, the platen rubber may
become stuck. This condition may cause a fatal error in the printer mechanism. To avoid this,
please keep a label loaded in the printer — even when not in use.
8. Do not use the printer without closing the print engine cover.
1