Table of Contents
Advertisement
Comment
Check how many battery chargers can be connected to one group. This can be calculated by multiplying
the amperage by the voltage. e.g.: 16A*230V =3680W
Now check the output of the battery charger. Divide this total amount by the output of the battery charger.
e.g.: 3680/700=5.25. In this case five battery chargers can be connected.
Also check that the mains voltage at the charger location corresponds with the required voltage stated on
each battery charger. Long cables can lead to voltage drop. If this is the case please consult your dealer.
Check whether it is the proper charger for your machine. The type of batteries applicable to the charger in
question are stated on the charger itself and the charger manual!
Substance Batteries wet, filled with acid, electric storage
UN Number 27
HIN 80
ADR Label 8
ADR Class 8
Packing group -
Emergency Response Information
CORROSIVE SUBSTANCE
1. Characteristics
• Corrosive, causing damage to skin, eyes and air passages
• Not flammable
2. Hazards
• Heating of container(s) will cause pressure rise with risk of bursting and subsequent explosion
(BLEVE).
• Gives off corrosive and irritant fumes, also when burning
• May attack metals and produce hydrogen gas which may form explosive mixture with air
• The vapour may be invisible and is heavier than air. It spreads along the ground and may
enter sewers and basements
3. Personal protection
• Chemical protection suit.
• Respiratory mask equipped with ABEKP1 filter
40 / 43
Translated user manual (EN-V11)
BENOMIC
Advertisement
Table of Contents
