English - Philips GC6106 User Manual

EnGlish

6
General description (Fig. 1)
Supply hose
A
Temperature light
B
Temperature dial and indicator
C
Steam activator and lock
D
- D1 Lock
- D2 Activator
Cap of steam tank
E
Iron stand
F
Steam tank
G
Mains cord
H
Steam-ready light (GC6107 only)
I
Steam tank switch with power-on light
J
Steam control (GC6107/GC6104 only)
K
Iron switch with power-on light
L
'Steam tank empty' light (GC6107 only)
M
Soleplate
N
important
Read this user manual carefully before you use the appliance and save it for
future reference.
Danger
- Never immerse the iron or the steam tank in water.
Warning
- Check if the voltage indicated on the type plate corresponds to the
local mains voltage before you connect the appliance.
- Do not use the appliance if the plug, the mains cord, the supply hose or
the appliance itself shows visible damage, or if the appliance has been
dropped or leaks.
- If the mains cord or the supply hose is damaged, you must have it
replaced by Philips, a service centre authorised by Philips or similarly
qualified persons in order to avoid a hazard.
- Never leave the appliance unattended when it is connected to the
mains.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
- Children should be supervised to ensure that they do not play with the
appliance.
- Do not let the mains cord and supply hose come into contact with the
hot soleplate of the iron.
- If steam escapes from under the steam tank cap when the appliance
heats up, switch off the appliance and tighten the steam tank cap. If
steam continues to escape when the appliance is heating up, switch
off the appliance and contact a service centre authorised by Philips.
- Do not remove the steam tank cap from the steam tank when the
steam tank is still under pressure.