Operation - Yanmar B95W Operating Instructions Manual

3.7
Machines may only be operated or serviced by persons belonging to the target
groups mentioned (See chapter "Definition of target groups", page 7.) They
must be designated by the operating company to operate or maintain the
machine.
All such persons must be of the legal minimum age.
03_Sicherheit_en.fm - V 0.1 - 1.8.17

Operation

Operate the control equipment only from the driver's seat.
When stepping up into or out of the vehicle, use the designated grips, railings,
access steps and surfaces or suitable aids (such as ladders or platforms).
The uppercarriage and undercarriage must be aligned. At least three of the
machine's supports must be in place whenever entering or exiting the vehicle.
Close all doors or secure these while they are open to prevent them from
slamming shut accidentally. The uppercarriage and undercarriage must be
aligned.
When opening or closing doors, windows, hoods and lids, use the fitted
handles/grips.
Make sure that the operator's stand, handles, access steps, and other
surfaces of the machine that have to be stepped on, are kept free of dirt,
grease, oil, ice, and snow.
Pay attention to sufficient access to the surroundings of the site of operation.
When operating without a sufficient field of view, always ensure you do so with
the assistance of a guide, who must remain in your field of view at all times.
Fasten the safety belt when working and pay attention to sufficient distance
from the surroundings.
Open and lock the driver's door only from the driver's seat.
Where necessary, take breaks to avoid tiredness.
Switch off the engine before leaving the vehicle.
B95W
3
Safety
31 / 306
46