Table of Contents
Advertisement
B-2 Compaq PowerStorm 600 Graphics Controller Hardware Guide
Writer: Carmen Wheatcroft Project: Compaq PowerStorm 600 Graphics Controller Hardware Guide Comments: B
Part Number: 120259-XX1 File Name: -appb Electrostatic Discharge.doc Last Saved On: 2/18/99 5:10 PM
Use a wrist strap connected by a ground cord to a grounded workstation
or computer chassis. Wrist straps are flexible straps with a minimum of
1 megohm ± 10 percent resistance in the ground cords. To provide
proper ground, wear the strap snug against the skin.
Use heel straps, toe straps, or boot straps at standing workstations. Wear
the straps on both feet when standing on conductive floors or dissipating
floor mats.
Use conductive field service tools.
Use a portable field service kit with a folding static-dissipating
work mat.
If you do not have any of the suggested equipment for proper grounding, have
an Authorized Compaq Reseller install the part
NOTE: For more information on static electricity, or assistance with product
installation, contact your Authorized Compaq Reseller.
Compaq Confidential – Need to Know Required
Advertisement
Table of Contents
