Configuring The Video Display; Verifying The Default Video Display Driver - Compaq PowerStorm 600 Hardware Manual

For the compaq professional workstation sp700
Table of Contents

Advertisement

CAUTION: When you select Display in the Windows NT Control Panel, a
message displays. Click OK to close the message. This message displays
every time you select Display unless you clear the Show warning at startup
check box.
For more detailed installation information, refer to the
delivered on the diskette containing the video display driver.

Configuring the Video Display

1. From the operating system Start menu, go to Settings/Control Panel and
click on the Control Panel icon.
2. Open Display in the Control Panel to view the Display Properties
dialog. Use the dialog tabs to configure the operation of the video
display when it is controlled by the driver for the PowerStorm 600
graphics controller. For example, click the Settings tab to change the
screen resolution.
For more detailed configuration information, refer to the
delivered on the diskette containing the video display driver.

Verifying the Default Video Display Driver

After you configure the video display as desired, verify that the driver for the
PowerStorm 600 graphics controller is the default video display driver that
runs automatically when you start the workstation.
To verify the default video display driver:
1. From the operating system Start menu, go to Settings/Control
Panel/System.
On the Startup/Shutdown tab, verify that Windows NT Workstation
Version 4.0 is selected in the Startup list. If it is not, select it from the list
and click Apply.
IMPORTANT: Do not select the VGA version of the operating system. The video display
runs in VGA mode when the driver for the PowerStorm 600 graphics controller is not
running.
2. Click OK to close the System dialog.
3. Click Display in the Control Panel.
4. Click the Settings tab.
Compaq Confidential – Need to Know Required
Writer: Carmen Wheatcroft Project: Compaq PowerStorm 600 Graphics Controller Hardware Guide Comments:
Part Number: 120259-XX1 File Name: e-ch4 Installing the Software.doc Last Saved On: 2/19/99 9:01 AM
Installing the Software 4-3
.
file
README
TXT
.
file
README
TXT

Advertisement

Table of Contents
loading

Table of Contents