Malfunctions & Solutions - EcoMotion CORE Pro + eFAT User Manual

Malfunctions & solutions
Problem
Speed / range
reduce
No power
(display
doesn't work)
PAS system
doesn't work
EcoMotion Bikes
Possible cause
Low tire air pressure
Brake pads rubbing
against their discs
PAS magnets away
from sensor
Low battery
Battery lifetime is
over / shortened
Ridding conditions
(headwind,
climbing, etc.)
Burnt fuse
Loos connector
Rupture wire
Faulty switch
Faulty controller
Battery lifetime is
over / battery not
charged.
Faulty display
Motor shutdown
system operated
PAS magnets away
from sensor
Faulty PAS sensor
Faulty controller
Display rupture wire
Solution
Inflate tiers to recommended
pressure
Adjust brakes and / or caliper
Attached the magnets to the
sensor
Charge the battery full
charge
Replace the battery
Reduce range to be
expected
Replace the fuse
Check all connectors
Inspect all wires for damage
Replace switch and retest
Replace controller and retest
Replace / charge the battery
and retest
Replace the display and
retest
Make sure that bake handles
in their place
Attached the magnets to the
sensor and retest
Replace the sensor and
retest
Replace controller and retest
Replace the display and
retest
24