DeZurik KLS User Manual

DeZURIK
3" Level Sensor Knife Gate Valve
Instructions
Safety
Messages
Parts
DeZURIK
Service
D10107
Instruction
These instructions are intended for personnel who are responsible for
the installation, operation and maintenance of Level Sensor Knife Gate Valves.
All safety messages in the instructions are flagged with the word
Caution, Warning or Danger. These messages must be followed exactly to avoid
equipment damage, personal injury or death.
Safety label(s) on the product indicate hazards that can cause equipment dam-
age, personal injury or death. If a safety label becomes difficult to see, or if a
label has been removed, please contact DeZurik for replacement.
WARNING!
Personnel involved in the installation or maintenance of
valves should be constantly alert to potential emission of
pipeline material and take appropriate safety precautions.
Always wear suitable protection when dealing with hazard-
ous pipeline materials. Handle valves which have been re-
moved from service with the assumption of pipeline material
within the valve.
Recommended spare parts are listed on the assembly drawing. These parts
should be stocked to minimize downtime.
Order parts from your DeZURIK sales representative, or directly from DeZURIK.
When ordering parts, please include the 7-digit part number and 4-digit revision
number (example: 9999999R000) located on the data plate attached to the
valve Also include the part name, the assembly drawing number, the
assembly.
balloon number and the quantity stated on the assembly drawing.
DeZURIK Service personnel are available to install, maintain and repair all De-
ZURIK products. DeZURIK also offers customized training programs and con-
sultation services. For more information, contact your local DeZURIK represen-
tative or visit our website at www.dezurik.com.
August 2009
©
2009 DeZURIK