Bosch GO Original Instructions Manual page 19

OBJ_BUCH-3206-003.book Page 19 Wednesday, September 20, 2017 2:06 PM
English | 19
Temperature Dependent Overload
Protection
When using as intended for, the power
tool cannot be subject to overload.
When the load is too high or the allow-
able battery temperature is exceeded,
the electronic control switches off the
power tool until the temperature is in
the optimum temperature range again.
Protection Against Deep Discharging
The lithium-ion battery is protected
against deep discharging by the
"Electronic Cell Protection (ECP)".
When the battery is empty, the machine
is switched off by means of a protective
circuit: The inserted tool no longer
rotates.
Maintenance and
Service
Maintenance and Cleaning
 Before any work on the machine
(e. g., maintenance, tool change,
etc.) as well as during transport
and storage, set the rotational di-
rection switch to the centre posi-
tion. Unintentional actuation of the
On/Off switch can lead to injuries.
 For safe and proper working,
always keep the machine and ven-
tilation slots clean.
When the battery is no longer opera-
tive, please refer to an authorised after-
sales service agent for Bosch power
tools.
1 609 92A 3WU | (20.9.17)
Bosch Power Tools