Bosch GO Original Instructions Manual page 12

OBJ_BUCH-3206-003.book Page 12 Wednesday, September 20, 2017 2:06 PM
12 | English
teners contacting a "live" wire may
make exposed metal parts of the
power tool "live" and could give the
operator an electric shock.
 Hold the machine with a firm grip.
High reaction torque can briefly
occur while driving in and loosening
screws.
 Secure the workpiece. A workpiece
clamped with clamping devices or in
a vice is held more secure than by
hand.
 Always wait until the machine has
come to a complete stop before
placing it down. The tool insert can
jam and lead to loss of control over
the power tool.
 Before any work on the machine
(e. g., maintenance, tool change,
etc.) as well as during transport
and storage, set the rotational di-
rection switch to the centre posi-
tion. Unintentional actuation of the
On/Off switch can lead to injuries.
Protect the power tool
against heat, e. g., against
continuous intense sun-
light, fire, water, and mois-
ture. Danger of explosion.
 In case of damage and improper
use of the battery, vapours may be
emitted. Ventilate the area and
seek medical help in case of com-
plaints. The vapours can irritate the
respiratory system.
1 609 92A 3WU | (20.9.17)
Bosch Power Tools