Error Display - Denon RCD-M38 Service Manual

【When TOC is read】
1 3
R E A D I N G

5.3 Error display

1 3
C D
Error code
E1-00
E1-01
E1-02
E2-00
E2-01
E2-03
E2-06
E2-10
E2-11
E2-12
E2-14
E2-15
E3-00
E3-01
E4-04
E4-05
E5-00
E6-00
E9-00
E9-01
【Number of heat runs performed when error occurred 】
(1) Press the +/ 9 button while the error is displayed.
(2) No. heat runs is displayed for 5 seconds, the error display reappears.
1 3
C D
（ 1 , 3 lit / XXXX：Number of heat runs repeated when error occurred）
【Track no. and elapsed time when error occurred】
(1) Press the 8 / - button while the error is displayed.
(2) The track no. and time when the error occurred is displayed for 5 seconds, then error display reappears.
1 3
C D
（ 1 , 3 lit / mm:ss：Number of heat runs repeated when error occurred）
E X - X X
（ 1 , 3 lit / X-XX:Error cord）
Disc cannot be detected
Tracking offset adjustment not possible
Focus offset adjustment not possible
Focus servo dropped during playback.
Focus servo dropped during searching.
Focus servo dropped during TOC reading.
Focus servo dropped during manual search.
Subcode can no longer be read during playback
Subcode can no longer be read during searching
Subcode can no longer be read during TOC reading
Subcode cannot be read during pause
Subcode cannot be read during manual search
TOC could not be read within specified time
PVD/SVD analysis could not be completed within specified time
Search time out
Error in communications with CD decoder
Inner switch not on
Inner switch not off
Tray is not opened by the specified time.
Other error
X X X X
0 1 Tr m m : s s
（ 1 , 3 lit）
23