No
Function
Button name
E1-00 : Disc cannot be detected
E1-01 : Tracking offset adjustment not possible
E1-02 : Focus offset adjustment not possible
E2-00 : Focus servo could not follow during
playback
E2-01 : Focus servo could not follow during
searching
E2-03 : Focus servo could not follow during TOC
reading
E2-05 : Focus servo could not follow during
pause
E2-10 : Subcode can no longer be read during
playback
E2-11 : Subcode can no longer be read during
searching
E2-12 : Subcode can no longer be read during
TOC reading
E2-14 : Subcode cannot be read during pause
7.3 Error display
E2-15 : Subcode cannot be read during manual
search
E3-00 : TOC could not be read within specified
time
E3-01 : PVD/SVD
analysis
completed within specified time
E4-04 : Search
time
out
completed within specified time)
E4-05 : Decoder bus (Error in communications
with CD decoder)
E5-00 : Inner switch not on
E6-00 : Inner switch not off
E9-00 : Error in CD microprocessor
E9-01 : Other error
・
Press the
button while the error is
displayed.
・
No. heat runs is displayed for 5 seconds, the
Error display
error display reappears.
7.4
switching (1)
Press the
button while the error is
・
displayed.
The track no. and time when the error occurred is
・
Error display
7.5
displayed for 5 seconds, then error display
switching (2)
reappears.
Display
lit
・
X-XX
: Error display
could
not
be
(searching
not
lit
・
XXXX
: No. of heat run repetitions
・
Error display reappears after 5 seconds. See S7.3.
In cases other than when
is lit, same display as
・
during normal playback.
・
Error display reappears after 5 seconds. See S7.3.
No
キー名称
E1-00 : ディスク検出出来ず
E1-01 : トラッキングオフセット調整出来ず
E1-02 : フォーカスオフセット調整出来ず
E2-00 : 再生中フォーカスサーボが追従できなかった
時があった
E2-01 : サーチ中フォーカスサーボが追従できなかった時
があった
E2-03 : TOC 読み込み中フォーカスサーボが追従でき
なかった時があった
E2-05 : ポーズ中フォーカスサーボが追従できなかった
時があった
E2-10 : 再生中サブコードが読めなくなった
E2-11 : サーチ中サブコードが読めなくなった
E2-12 : TOC 読み込み中サブコードが読めなく
なった
7.3
エラー表示
E2-14 : ポーズ中サブコードが読めない
E2-15 : マニュアルサーチ中サブコードが読めない
E3-00 : TOC 規定時間以内に読めず
E3-01 : PVD/SVD 解析規定時間以内に終わらず
E4-04 : サーチタイムアウト(サーチが規定時間内に終了しな
かった )
E4-05 : デコーダバス (CD DECODER との通信エラー
が発生した )
E5-00 : 内周 SW ON せず
E6-00 : 内周 SW OFF せず
E9-00 : CD マイコンエラーが発生
E9-01 : その他のエラーが発生
・エラー表示中に
・ヒートラン回数を 5 秒間表示し、エラー表示に戻る.
7.4
エラー表示の切換 (1)
・エラー表示中に
・発生時のトラック番号と時間を 5 秒間表示しエラー表
示に戻る.
7.5
エラー表示の切換 (2)
15
機能
表示
・
を点灯
X-XX
:エラー表示
キーを押す.
・
を点灯
XXXX
:ヒートラン繰り返し回数
・5 秒後にエラー表示に戻る.S7.3 参照
キーを押す.
・
を点灯している以外は通常再生中と同様の表
示.
・5 秒後にエラー表示に戻る.S7.3 参照
S-81/S-81DAB