No
Function
Button name
The CD heat run mode is launched. Once writing
・
of the TOC data is completed, press the CD
PLAY/PAUSE button. Count this as the 0th heat
run repetition.
Play from the first to last track on disc.
①
If disc being used has less than 20 tracks, play
②
all tracks. If disc has 21 or more tracks, skip to
final track after playback of first track has
finished.
After disc playback has finished, move pickup
③
to innermost position and open tray.
Normal heat run
7.1
When loader open status detected, close tray
④
mode
again, re-read TOC and start playback from
the first track on the disc.
The heat run repetition no. is incremented
⑤
(increased by 1) when the tray is opened.
⑥
Conduct
①
to
⑤
repeatedly.
・
After CD heat run mode has started and reading
the TOC has finished, press the CD STOP/
BAND button once in the stop mode.
TOC reading
Search for first track on disc
・
⇒
Automatic
tray open
tray close
⇒
⇒
7.2
mounting mode
repeat. No. heat run repetitions displayed on
time display section.
Increment the heat run repetition no. (increase by
・
1) at the point when the loader has finished
opening.
Display
lit
・
① , ②
In cases other than when
is lit, same display as
・
during normal playback.
③
XXXX
: No. of heat run repetitions
④
While tray opened
Same as for regular heat run. See 7.1
・
When tray closed
⇒
Same as for regular heat run. See 7.1. ④
・
TOC reading
⇒
No
キー名称
7.1
通常ヒートランモード
.
③
7.2
チャッキングモード
14
機能
・CD ヒートランモードが起動し、TOC READ が完了し
・
た後、CD PLAY/PAUSE ボタンを押す.この時、
①、②
ヒートラン繰り返し回数を 0 回目とする.
・
① ディスクの先頭トラックから最終トラックまで再生す
る.
② 使用ディスクが 20 トラック以内の場合は全トラックを
再生する.21 トラック以上なら1トラック目終了後、
最終トラックにスキップする.
③ ディスクの再生終了後、ピックアップを最内周に移
動させトレイを開く.
③
④ ローダー OPEN 状態を検出したら、再度トレイを
閉じ再度 TOC を読み取り後、ディスクの先頭
トラックから再生を開始する.
⑤ ヒートラン回数はトレイを OPEN したところで
XXXX
インクリメント ( ヒートラン回数を 1 つ増やす ) する.
④
⑥ ①∼⑤を繰り返し実行する.
・CD ヒートランモードが起動し、TOC READ が完了し
トレイオープン中
た後、停止中に CD STOP/BAND ボタンを 1 回押
・通常ヒートラン時と同じ.S7.1 ③を参照
す.
トレイクローズ中
・TOC 読込み⇒ディスクの先頭トラックをサーチ⇒
・通常ヒートラン時と同じ.S7.1 ④を参照
トレイ OPEN ⇒トレイ CLOSE ⇒ TOC 読込み⇒を繰り
返す。時間表示部にヒートランの繰り返し回数を表
示する。
・ヒートラン回数はローダーを OPEN し終えたところで
インクリメント ( ヒートラン回数を 1 つ増やす ) する.
S-81/S-81DAB
表示
を点灯
を点灯している以外は通常再生中と同じ表示.
:ヒートラン繰り返し回数