Advanced Features - Plantronics Blackwire C720M User Manual

Advanced features

Mobile talk button LED indicators
Incoming call
Active call
Media audio
Pairing mode
Powering on
Power off
Smart Sensor technology
Sensors detect whether or not you are wearing the headset. Sensors are located in the speaker
capsule on the microphone boom side.
Auto answer call:
When you are not wearing
your headset.
Auto pause media:
When you are listening
to media audio.
Auto transfer call:
Whether you are wearing your
headset or not.
NOTE These features are enabled by default and can be disabled in the Plantronics Control Panel. The
Plantronics Spokes software must be downloaded to access the Control Panel. Changes to the settings
require that you are connected to the PC. Load Plantronics Spokes software by visiting
com/software and clicking "Download".
Rapid flash blue
Slow flash blue
Slow flash blue
Flash red and blue
Solid blue (two seconds)
Solid red (two seconds)
When you have an incoming call on your mobile
or PC softphone, put on the headset and the call
will be answered automatically. You do not have
to press the call button.
When you are listening to media audio from your
mobile phone, remove the headset and the audio
pauses. Place your headset back on and the
audio resumes.
Note
than 10 seconds you will have to manually
restart the media player.
Note
than 5 minutes you will have to manually
restart the media player.
Note
available with your mobile phone. PC media
audio does not auto pause.
If you are not wearing your headset and you
answer an incoming call on your mobile phone,
the audio will be routed to the mobile phone.
When you put the headset on, the audio will be
automatically transferred to the headset.
If you are already wearing your headset and there
is an incoming call, the audio will be routed to
the headset and you will need to press the mobile
talk button to answer the call.
If the media player has been playing less
If the audio remains paused for more
Auto pause media feature is only
plantronics.
14