Page 1
Realtek UWB BG13 HMC User Guide_revC.doc Realtek UWB BG13 HMC User Guide Revision C Author : Marco Chuang Date : 2009/02/10 All Rights Reserved by Realtek Corp.
Realtek UWB BG13 HMC User Guide_revC.doc 1. Introduction This document describes the system, operations, and interfaces the UWB BG1/3 HMC (half mini card) module. Two main applications are supported by this module. One is wireless USB application and the other one is WiNet mode.
Flash utility provided by Realtek. The RF performance can also be tested using the test utility provided by RealTek. Two basic clock frequencies are used in the system – 12MHz for MAC and 66MHz for PHY. Some more details of the components are shown in the following sections.
UWB MAC 2.2. This MAC chip is also from RealTek which has a standard MPI interface to communicate with a standard UWB PHY, as well as a high speed USB interface to connect directly to a PC. This chip requires voltages of 1.2V and...
Realtek UWB BG13 HMC User Guide_revC.doc 3. Hardware Interfaces 3.1. PCIe half mini card Interface Table 1 half mini card connector termination assignment All Rights Reserved by Realtek Corp.
Realtek UWB BG13 HMC User Guide_revC.doc 4. Document History Date Revision Description Author 2008/11/13 Marco Chuang Initial Release Marco Chuang 2009/02/10 Modify 5. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
Realtek UWB BG13 HMC User Guide_revC.doc CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Need help?
Do you have a question about the UWB BG13 HMC and is the answer not in the manual?
Questions and answers