Lan Cradle (Ha-R62Io - Casio IT-G400 Series User Manual

LAN Cradle (HA-R62IO)

The LAN Cradle allows a LAN interface to be used to transfer data between the IT-G400
and a personal computer. It can also be used to supply power to the IT-G400 and to charge
the battery pack.
Part Names and Operation
<Top>
6
1 LAN port
2 Serial port
3 AC adapter jack
Power supply/
4
data communication terminal
5 Battery pack power contacts
Battery pack charging status
6
LED
Installing and Connecting the Power Supply
Use the supplied AC adapter as the power supply for the LAN cradle.
1. Plug the AC adapter into the AC adapter jack
on the back of the LAN cradle.
2. Plug the AC adapter into a mains power outlet.
3. When using a LAN, plug the LAN cable into
the LAN port and then connect the cable to the
computer or to a hub.
E-40
5
2
4
Used to connect and transfer data to a personal computer or hub
via a LAN cable for data transfer.
The cradle features a serial port, but it cannot be used.
Used to connect an AC adapter as a power supply.
Used to supply power to the IT-G400 or for data communication.
Used to charge the battery pack.
Shows the charging status.
Red:
Green:
Flashing alternately red/green: Battery pack fault or outside
<Back>
Charging
Charging complete
charging temperature range
Computer
1
3