Specification; System Requirements - i-tec USB 2.0 Fast Ethernet Adapter User Manual

Introduction
The USB 2.0 Fast Ethernet Adapter allows user's computer instantly connect to a
10/100 Mbps network through an existing USB port. No need to purchase an extra
network card and share a PCI or Cardbus slot. With compliance with USB 2.0
specification, this adapter ensures true 10/100 Mbps network speed without any
compromise. Besides, compact and bus-powered design means external power is not
required.
Features
■ USB 2.0 to 10/100 Mbps Fast Ethernet
■ Support both full-duplex and half-duplex operations
■ Support Wake-on-LAN function and suspend mode
■ Powered by USB port only
■ Plug & Play installation

Specification

■ Ports: USB 2.0 type A Male and RJ-45 for Fast Ethernet cable
■LED indicators: Green, Yellow
■Chipset Asix AX88772B with SRAM for RX/TX packet buffering
■Power: USB Bus Power 5V
■Housing from PVC
■Supported OS : Windows® XP, Windows® 7, Windows® 8, Mac® OS 10.6-10.8
■ Operation Temperature: 0-70°C
■ Storage Temperature: -10-80°C
■ Size (L x W x H): 66 x 22 x 15 mm
■Weight: 24 g
■Compliance: CE, FCC
Specification is subject to change without further notice

System Requirements

■ Windows® XP / 7 / 8
■ Mac®OS
■ Free USB port (USB 3.0 / USB 2.0 / USB 1.1)
2