TEFAL Pro Express Instruction Booklet page 16

Hide thumbs Also See for Pro Express:
Table of Contents

Advertisement

PLEASE REFER TO SAFETY INSTRUCTIONS AT THE BEGINNING
OF THIS BOOKLET BEFORE USING YOUR APPLIANCE
Description
Steam control button
1.
Power cord storage button / storage space*
2.
Retaining hoop for locking iron on the base unit*
3.
Handle for removing and replacing the detachable water tank
4.
Boiler (in the base unit)
5.
Steam cord storage compartment
6.
Anti-calc collector
7.
Preparation
What water may be used?
• Untreated tap water
Your appliance has been designed to function using untreated tap water. If your water is very hard, we recommend you
use a mix of 50% untreated tap water and 50% distilled water available in hardware stores.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic
waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance: water from
clothes dryers, scented or softened water, water from refrigerators, batteries, air conditioners, rain water, boiled, filtered or bottled
water. These types of water should not be used in your TEFAL iron. Also only use distilled water as advised above.
Always remember:
Never use rainwater or water containing additives (like starch, fragrance or water from domestic appliances). Such
additives can affect the steam properties and at high temperature, form deposits in the steam generator chamber
which are likely to stain your washing
Filling the water tank
• Remove the detachable water tank using the handle (located at the front of the steam generator)
• Fill the water tank without exceeding the Max level
• Push it back into its housing until you hear a «click»
Use
Pro Express
Switch the steam generator on
The first time the appliance is used, there may be some fumes, smell and reject of particules but this is not
harmful. They will not affect use and will disappear rapidly.
• Place the steam generator on a flat, stable, horizontal surface that is heatproof and waterproof.
• Always ensure that the base unit is positioned close enough to the ironing surface to avoid straining and wear of
the steam cord.
• Completely unwind the power cord and take the steam cord out of its storage space.
• Plug your steam generator into an earthed socket.
• Press the «ON-OFF»
button.
• The «ON-OFF» button light remains flashing while the appliance is warming up. When the light stops flashing (after
approximately 2 minutes) the steam generator is ready.
Control panel
8.
a. «ON-OFF» button with light
b. «Water tank empty» light and «OK» button
c. «Anti-Calc» light and «OK» button
d. «ECO» button
Soleplate
9.
*
Depending on model

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents