Adjusting The Suction Power; Accessories; Switching Off The Vacuum; Cleaner And Parking Feature - Beko 01M-8833043200-2517-05 User Manual

3 Operation
3.6.1 Adjusting the suction
power
You can adjust the suction power of the appliance
by turning the suction power button (3) located on
the body of the device clockwise according to the
type of the surface to be cleaned. To decrease the
suction power turn the button counterclockwise.

3.7 Accessories

There is an accessory carrier (16) on the
telescopic tube (14) of the appliance. You can use
it by attaching 2 accessories supplied with the
appliance.
If you do not want to use accessory
C
carrier (16), unscrew it with the aid
of a screwdriver and remove it from
the telescopic tube (14).
Crevice tool
Suitable for the cleaning of the
surfaces which are difficult
to clean, such as the areas
remaining under the sofas and
furniture.
Upholstery Brush
Suitable for the cleaning of the
floorings, stair steps, inside of
the cars, sofas, armchairs etc.
Dust brush
Suitable for the cleaning of
curtains, and sensitive and
fragile objects.
A
WARNING: Do not make cleaning
by using the handle' s (18) end part.
8 / 60 EN

3.8 Switching off the vacuum

cleaner and parking feature

1. Switch off the appliance with the on/off button
(6) and unplug it.
2. Wind the electric cable inside the appliance
by gently pulling and releasing the cable (the
appliance will automatically take the cable
inside) or by pressing the cable re-winding
button (2)
Vertical parking
Insert the hook of the parquet/carpet brush (12)
into the parking channel located at the bottom
section of the appliance.
Horizontal parking feature
Insert the hook of the parquet/carpet brush (12)
into the parking channel (5) located at the rear
section of the appliance.
3. You can carry the appliance by holding it from
the carrying handle (4).
Vacuum cleaner / User manual