Panasonic SC-HC402 Operating Instructions Manual page 21

4
Put up the wall mounting sheet on the wall where
the unit is to be mounted.
≥ Spread out the wall mounting sheet when tapping it to
the wall.
Wall mounting sheet
Wall
Space required
300 mm
130.5 mm
141 mm
102.5 mm
73 mm
118.5 mm
420 mm
100 mm
5
Make holes on the wall at the center of each cross
mark on the sheet.
≥ Take the sheet away from the wall after its use.
6
Attach each wall mount bracket to the wall with two
screws (not supplied).
≥ Use a level to ensure both wall mount brackets are
level.
‰4.0 mm
At least 30 mm
‰7.5 mm to
‰9.4 mm
Wall mount bracket
7
Attach the safety holder with two screws (not
supplied) to the wall.
At least 30 mm
‰4.0 mm
‰7.5 mm to
‰9.4 mm
Safety holder
Adhesive tape (not supplied)
39 mm
100 mm
8
Attach the unit.
1 Hook the unit securely onto the wall mount brackets
with both hands.
≥ Connect the antenna and the AC mains lead to the unit
before hanging the unit onto the wall. (l 6)
Wall
AC mains lead
2 Slightly uplift the unit vertically until reaching the
hook of the safety holder, and push lower so that
the unit is hooked and locked in the safety holder.
≥ The unit will be locked onto the safety holder with a click sound.
≥ After hanging the unit, release your hands carefully to
confirm the unit sits securely on the wall mount brackets
and the safety holder.
Wall
Hook
9
Attach the fall prevention cord (not supplied) to the
wall.
≥ Make sure that the slack of the cord is minimal.
Wall
∫ To release the unit from the safety holder
While pressing two catches of the safety holder, uplift
the unit vertically.
Catches
Wall mount bracket
Safety holder
Screw eye (not supplied)
Cord (not supplied)
21
TQBJ0987